<div dir="auto">We do these all the time. Relocation of the pv input from the load center to the utility side of the generator transfer switch has always been our solution. <br><br><div data-smartmail="gmail_signature">Aaron Mandelkorn<br>President / Founder<br>Renewable Energy Outfitters<br><a href="http://www.reosolar.com">www.reosolar.com</a><br>Off Grid Depot<br><a href="http://www.offgridnow.com">www.offgridnow.com</a><br>970-596-3744<br><br> </div></div><div class="gmail_extra"><br><div class="gmail_quote">On Jan 12, 2018 4:00 PM, "Jerry Shafer" <<a href="mailto:jerrysgarage01@gmail.com">jerrysgarage01@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div>Wayne<br></div>We will not connect a grid tie inverter down stream of a gen-set, you don't want the inverter attempting to connect, when it comes right down to it, Why would you want to it would be a very small micro grid that if and when the demand is less then the inverter output would be then the gen-set would produce no power, volts yes amps no, then the volts climb the inverter discos and bam the genny has to make it all up. We have 8 k to 250 k gennys and PV systems attached all are upstream or in switches to turn them off. <br></div>Jerry <br></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Jan 11, 2018 at 3:54 PM, Wayne Irwin <span dir="ltr"><<a href="mailto:PureEnergySolar@hotmail.com" target="_blank">PureEnergySolar@hotmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div id="m_8464678262954602670m_-7399314951906504041divtagdefaultwrapper" style="font-size:12pt;color:#000000;font-family:Calibri,Helvetica,sans-serif" dir="ltr">
<p style="margin-top:0;margin-bottom:0">Hello All,</p>
<p style="margin-top:0;margin-bottom:0"><br>
</p>
<p style="margin-top:0;margin-bottom:0">We have several customers adding generators to their homes on which we have previously installed PV systems.</p>
<p style="margin-top:0;margin-bottom:0">Historically most generators didn't produce a clean enough 60Hz sinewave to get the inverters to feed back.</p>
<p style="margin-top:0;margin-bottom:0">However, with the generator technology improving and the introduction of inverter generators, I'm concerned that if the inverters feed back to the generator it will smoke the stator.<br>
</p>
<p style="margin-top:0;margin-bottom:0"><br>
</p>
I'm wondering if any of you have any experience/issues? If so, what solutions or recommendations do you have?
<p></p>
<p style="margin-top:0;margin-bottom:0"><br>
</p>
<p style="margin-top:0;margin-bottom:0">Thanks,<br>
</p>
<p style="margin-top:0;margin-bottom:0"><br>
</p>
<br>
<div id="m_8464678262954602670m_-7399314951906504041Signature"><font style="font-size:12pt" size="3" color="#008A17">Wayne Irwin</font><font style="font-size:12pt" size="3" color="#008A17">,</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17">President</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17">License #CVC56695 </font>
<font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17">State Licensed Solar Contractor</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17">Pure Energy Solar International Inc.
</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17"></font><font style="font-size:12pt" size="3" color="#008A17"><a href="mailto:PureEnergySolar@hotmail.com" id="m_8464678262954602670m_-7399314951906504041LPNoLP" target="_blank">Wayne@PureEnergySolar.com</a></font><font style="font-size:12pt" size="3" color="#008A17">
</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17"></font><font style="font-size:12pt" size="3" color="#008A17"><a href="http://pureenergysolar.net/" id="m_8464678262954602670m_-7399314951906504041LPNoLP" target="_blank"></a><a href="http://PureEnergySolar.com" id="m_8464678262954602670m_-7399314951906504041LPNoLP" target="_blank">http://PureEnergySolar.com</a><br>
<a href="https://solarchargingstation.net" id="m_8464678262954602670m_-7399314951906504041LPNoLP" target="_blank">http://SolarChargingStation.ne<wbr>t</a><br>
</font><font style="font-size:12pt" size="3" color="#008A17"></font><font style="font-size:12pt" size="3" color="#008A17"><a href="tel:(352)%20377-6527" value="+13523776527" target="_blank">352 377-6527</a> Office</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:12pt" size="3" color="#008A17"><a href="tel:(352)%20336-3299" value="+13523363299" target="_blank">352 336-3299</a> Fax</font><font style="font-size:12pt" size="3" color="#008A17"><br>
</font><font style="font-size:10pt" size="2" color="#008A17"><br>
</font><font style="font-size:10pt" size="2" color="#008A17"><br>
<font style="font-size:12pt" face="Comic Sans MS">The Sun Is Always Shining!</font><font face="Arial"><br>
<br>
</font></font>
<p class="m_8464678262954602670m_-7399314951906504041ecxecxecxEC_EC_EC_EC_EC_MsoNormal"><font style="font-size:10pt" size="2" face="Arial" color="#008A17">The content of this message is Pure Energy Solar Confidential. If you are not the intended recipient and have received this message in error, any
use or distribution is prohibited. Please notify me immediately by reply e-mail and delete this message from your computer system. Thank you.</font></p>
</div>
</div>
</div>
<br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/o<wbr>ptions.cgi/re-wrenches-re-wren<wbr>ches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re<wbr>-wrenches@lists.re-wrenches.or<wbr>g/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>
<br>______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.<wbr>htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div></div>