<html><head><meta http-equiv="Content-Type" content="text/html charset=windows-1252"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;" class="">Hi Bill,<div class=""><br class=""></div><div class="">What about installing unistrut to the roof on those attachment points, then installing the racking to the unistrut?</div><div class=""><br class=""></div><div class="">jay</div><div class=""><br class=""></div><div class="">peltz power<br class=""><div><blockquote type="cite" class=""><div class="">On Apr 29, 2016, at 6:55 AM, frenergy <<a href="mailto:frenergy@psln.com" class="">frenergy@psln.com</a>> wrote:</div><br class="Apple-interchange-newline"><div class="">
<meta content="text/html; charset=windows-1252" http-equiv="Content-Type" class="">
<div bgcolor="#FFFFFF" text="#000000" class=""><p class="">Recently, a customer had a metal roof (not standing seam)
installed by a "handyman". Pretty clean installation however for
some reason he ran 1X6 stringers across the roof on the 1/2"
plywood deck spaced about every 4 feet (as you go from ridge to
eaves). Of course the roofing screws are at the stringers. I'm
sure he had a <i class="">great</i> reason for doing so. So now I have
been asked to install an array on this roof. You can feel how
"soft" the roof is as you walk on it of course because you are
walking on air-below-metal for most of the roof. Stringer
locations don't jive with possible feet/post locations for rail.
I'm usually pretty good at problem solving but I'm accepting
ideas.</p><p class="">Bill</p>
<pre class="moz-signature" cols="72">Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
<a class="moz-txt-link-abbreviated" href="http://www.frenergy.net/">www.frenergy.net</a></pre>
</div>
_______________________________________________<br class="">List sponsored by Redwood Alliance<br class=""><br class="">List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" class="">RE-wrenches@lists.re-wrenches.org</a><br class=""><br class="">Change listserver email address & settings:<br class=""><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" class="">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br class=""><br class="">List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html<br class=""><br class="">List rules & etiquette:<br class="">www.re-wrenches.org/etiquette.htm<br class=""><br class="">Check out or update participant bios:<br class="">www.members.re-wrenches.org<br class=""><br class=""></div></blockquote></div><br class=""></div></body></html>