<font color='black' size='2' face='arial'>Wrenches,
<div>&nbsp; &nbsp; I have an off-grid installation with an Outback Radian using a Kohler RES 13 for backup. &nbsp;The generator has had problems from day one and has had control boards replaced and other work done on it. &nbsp;This system started out with a Magnum 4024AE but was undersized for the loads and battery size so we upgraded to the Radian. &nbsp;The current problem is the generator running erratically (frequency and voltage) and running rough. &nbsp;The Kohler repairman said that the problem is that the inverter had damaged the generator with a measured 12 VAC at the inverter side of the AC IN breaker when the generator is off. &nbsp;When I arrived, we started the generator with the MATE 3 and it worked fine for about 10 minutes charging at 4.5 kw and then the engine started running erratically. &nbsp;The frequency readout on the MATE 3 ranged from 56 Hz to 67 Hz and the voltage was sometimes steady at 238 and at times varying from 236 to 244. &nbsp;The MATE 3 showed several manual starts previously where the Initial voltage was 277 briefly (1 second) and then leveled out and locked on. Eventually the generator shut down with Error 13. &nbsp;We also had it fail to start with Locked Rotor error. &nbsp;I did measure 3.1 VAC on the AC out bus of the inverter when the generator was stopped. &nbsp;Is that small voltage present normal for the Radian and is there any way that could affect the generator? &nbsp; When I set the MATE 3 to DROP to disconnect the charging, we could still read the hz and Voltage at the bus and the erratic behavior continued. &nbsp;I think there are serious problems with the generator but the Kohler tech says it is the inverter interference . &nbsp;When we started the generator manually with the input breaker off, it ran erratic and eventually shut down. &nbsp;</div>

<div><br>
</div>

<div>The customer wants the generator guy and myself there tomorrow to figure out how to fix it. &nbsp; I say a new generator might take care of the problem but the customer doesn't want to hear this.</div>

<div>Any ideas? &nbsp;I have dealt with lots of generators and to me this seems like a worn out genny.&nbsp;</div>

<div><br>
</div>

<div>John Blittersdorf</div>

<div>Central Vermont Solar &amp; Wind &nbsp;<br>
<br>
<br>

<div style="font-family:arial,helvetica;font-size:10pt;color:black"><br>

<div id="AOLMsgPart_2_8be06810-83e3-4e2e-93b7-03cb12b7bac2">
<div class="aolReplacedBody" lang="EN-US" bgcolor="#ffffff" vlink="purple" link="blue"><blockquote style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<div class="Section1">
  
<div class="MsoNormal"><br>
</div>
</div>
</blockquote></div>
 <!-- end of AOLMsgPart_3_8be06810-83e3-4e2e-93b7-03cb12b7bac2 -->



</div>
</div>
</div>
</font>