<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <div class="moz-cite-prefix"><br>
      <br>
      My 2 cents worth here says that this PID problem is the same as
      the negative ground problem that occurred with the<br>
      Sun&nbsp; Power modules that wanted to be positive grounded.&nbsp; Last I
      heard, from Sun Power was that they<br>
      have basically gotten around that issue and&nbsp; are "ground agnostic"
      as either Sun Power or Bill Brooks<br>
      says.&nbsp;&nbsp; Transformer-less or non-isolated inverters are used with
      an un-grounded PV array and I<br>
      think that is what Zachary Strassman&nbsp; is talking about in his
      reply to the question.<br>
      <br>
      I do not see the answer to the question about AC line frequency
      ripple though which<br>
      would be 120 Hz (US) or 100 Hz for a 50 Hz grid system at the PV
      module.<br>
      <br>
      The ungrounded part makes sense but as far as TL inverters vs.
      inverters with transformers,<br>
      both topologies should try to keep the PV voltage right at maximum
      power point voltage.&nbsp; If they<br>
      do that to extract as much energy as possible from the array,
      there will be little to no 120Hz or 100Hz<br>
      ripple...&nbsp; If the inverter is designed correctly anyway.<br>
      <br>
      boB<br>
      <br>
      <br>
      <br>
      On 12/27/2013 8:39 AM, Drake wrote:<br>
    </div>
    <blockquote cite="mid:20131227164242.3789FFFC6@che.dreamhost.com"
      type="cite">
      Hello Wrenches,<br>
      <br>
      Attached is an article from Home Power that came in my email. It
      says
      module degradation is increased by PID (Potential Induced
      Degradation) by
      the use of transformerless inverters.&nbsp; It says power degradation
      can
      occur over days or weeks and cause a 10% to 60% loss of
      efficiency.
      <br>
      <br>
      I called Power One and SMA and their tech support people have not
      had any
      reports of problems. Is this something we need to be concerned
      about?<br>
      <br>
      <br>
      Thanks,<br>
      <br>
      <br>
      Drake<br>
      <br>
      <br>
      <a moz-do-not-send="true" name="_MailAutoSig"></a>Drake Chamberlin<br>
      <i>Athens Electric LLC<br>
        OH License 44810<br>
        CO License 3773<br>
        NABCEP Certified Solar PV <br>
        740-448-7328<br>
      </i><a moz-do-not-send="true" href="http://athens-electric.com/">http://athens-electric.com/</a>
      <br>
    </blockquote>
    <br>
  </body>
</html>