<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Mac;<br>
<br>
Is this off grid? The Intimidator is not a high cycle life
battery. I've had trouble finding exact ratings, but its probably
in the 250 to 300 cycles at 80% DOD. I'd expect 3 years max in an
off grid application. Also the Intimidators I've seen are
actually AGM, not Gel, but I don't know. I looked on Deka's
website but didn't find any good charge set points. This is
basically a sealed RV/ Marine battery. Definitely not a top
choice, but its what the battery guys have on the shelf, so that's
what they sell.<br>
You're on to the biggest problem, pulling off opposite corners of
the bank to balance the connector resistance between all the
strings. <br>
I go out of my way not to poo poo the customer's choice, but to
make sure and let them know you can't guarantee the performance of
the system. I had almost the exact experience just a few months
ago, where the customer had just bought a new set of
Intimidators. I just told him to use them up, no sense in
worrying about it, and when they were worn out, we'd get him
something better. I used AGM setting on the Midnite controller on
that system. Voltage set points should be his responsibility to
track down, if their gel. It keeps you from being responsible for
anything to do with the battery performance or life. When he
needs a new set, you sell him the right stuff, set it up right,
and low and behold you'll look good when they outlast his previous
sets.<br>
<pre class="moz-signature" cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760</pre>
On 8/3/2013 5:31 PM, Mac Lewis wrote:<br>
</div>
<blockquote
cite="mid:CAOABG48UMom5=Bpi5U-QvYPS=Z0Qmd4Wy8FrZyEXdxb6S+UK_g@mail.gmail.com"
type="cite">
<div dir="ltr"><span
style="font-family:arial,sans-serif;font-size:13px">Hello
wrenches,</span>
<div style="font-family:arial,sans-serif;font-size:13px"><br>
</div>
<div style="font-family:arial,sans-serif;font-size:13px">I am
looking for guidance with charging setpoints for a battery
that I don't have experience with. This system was put in by
another solar company and this battery bank failed after 1.5
years. He bought these batteries without consulting us, but
now we are stuck with them.</div>
<div style="font-family:arial,sans-serif;font-size:13px">It is a
Deka Intimidator Gel Sealed Battery 12V 225 Ahr. It is set up
as 3 strings of 4 batteries to give a 675Ahr bank at 48V. The
batteries were not wired at opposite corners, but
inverter/charger leads were connected to the middle string.
We will fix that and other things but I don't use Deka
batteries.</div>
<div style="font-family:arial,sans-serif;font-size:13px">What
charger setpoints would you recommend for this battery bank?
Does anyone have a good tech contact at Deka? Anyone have
any results to report about this type of battery in a solar
application?</div>
<div style="font-family:arial,sans-serif;font-size:13px"><br>
</div>
<div style="font-family:arial,sans-serif;font-size:13px">Thanks
in advance</div>
<div><br>
</div>
-- <br>
<div><br>
</div>
<div><font face="'times new roman', serif" color="#305A78"><br>
</font></div>
<div><br>
</div>
Mac Lewis<br>
<br>
<span style="font-family:'Times New
Roman';font-size:medium;color:rgb(255,153,0)"><b><font
face="Arial, Helvetica, sans-serif" size="3">
<p align="left"><font face="Verdana, Arial, Helvetica,
sans-serif" color="#000000"><span
style="font-size:small"><span
style="font-family:arial;font-weight:normal;color:rgb(48,90,120)"><font
face="'times new roman', serif">"Yo solo sé que
no sé nada." </font><span
style="font-weight:700;color:rgb(104,104,104)"><font
face="'times new roman', serif">-Sócrates</font></span></span></span></font></p>
</font></b></span>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
List sponsored by Home Power magazine
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>
Check out participant bios:
<a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>
</pre>
</blockquote>
<br>
</body>
</html>