<div dir="ltr">Hands down my favorite to use. Ditto what Daryl says. Wire management is a breeze. Stamped engineering for my state makes the AHJ happy. Clean lines.<div><br></div><div style>My only gripe is that the ends of the rails tend to be VERY tight making it tough to install their universal end-clamp if you are in a precarious position on the roof. I use my linemen's pliers in reverse to spread the ends out before sending them up.</div>
<div class="gmail_extra"><br clear="all"><div style>3 years of use and this is my only complaint.</div><div style><br></div><div>Lou<div><br></div></div>
<br><br><div class="gmail_quote">On Fri, May 31, 2013 at 3:44 PM, <span dir="ltr"><<a href="mailto:penobscotsolar@midmaine.com" target="_blank">penobscotsolar@midmaine.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
It is my favorite. My crew said they would mutiny if I changed back to<br>
others we have used. Wire management is simplified due to a large channel,<br>
spacing of L feet can be up to 6 feet on a 12 pitch roof. We have tried<br>
many manufacturers and this is all we have been using for the last three<br>
years.<br>
<br>
Daryl<br>
<div class="HOEnZb"><div class="h5"><br>
<br>
> Hello Wrenches,<br>
><br>
> How would you rate the SnapNrack mounting systems against Unirac and<br>
> other mounting systems?<br>
><br>
> Thanks,<br>
><br>
> Drake<br>
><br>
> _______________________________________________<br>
> List sponsored by Home Power magazine<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
><br>
> Change email address & settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive:<br>
> <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
><br>
> List rules & etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
><br>
> Check out participant bios:<br>
> <a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
><br>
><br>
<br>
<br>
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</div></div></blockquote></div><br></div></div>