<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><div><div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">Mark,</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">You wrote, "<span class="Apple-style-span" style="font-size: 13px; color: rgb(0, 0, 0); font-family: verdana, geneva; ">If you put the lag anywhere near the middle of the rafter it won't split. </span><span class="Apple-style-span" style="font-size: 13px; color: rgb(0, 0, 0); font-family: verdana, geneva; ">If it splits, it must be some cheap stuff from Home Depot. </span></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><span class="Apple-style-span" style="font-size: 13px; color: rgb(0, 0, 0); font-family: verdana, geneva; ">Only an engineer with no practical experience would insist on a pilot hole and the resulting reduction in holding strength</span><span class="Apple-style-span" style="font-size: 13px; color: rgb(0, 0, 0); font-family: verdana, geneva; ">.</span>" </div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">Drilling a properly sized and depth pilot hole will…</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">-reduce the possibility of the rafter splitting, </div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">-reduce further opening an existing split and </div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">-reduce the chance of splitting a rafter when lagging directly into solid knot that will surely split without a pilot hole</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">...and if the whole roof is built with the same 'cheap stuff from home depot' then wouldn't you want to reduce the chance of every penetration/rafter splitting and compromising the integrity of the installation?</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><br></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">A <u><i>properly sized</i></u> pilot bit will not reduce the pullout or shear strength of a lag bolt. There are charts for reference for different types of wood.</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><br></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "> Anyone who works with wood and where splitting, structural or aesthetics are a concern (carpenter, cabinet maker, framer…rooftop PV installer) should know that wood splitting is significantly reduced when a pilot hole is used. It is a 'best practice' method.</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><br></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">I don't sweat over using just L-feet, because when I do I'm confidant that I'm using an approved sealant and enough of it to make each hole I drill in the roof leak-free, but I will not deny that a flashed roof penetration is a superior and first choice method.</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><br></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">Cheers,</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; ">Benn</div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><br></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><div><div>DayStar Renewable Energy Inc. </div><div>www.daystarsolar.ca</div><div>780-906-7807 </div><div>Certified Construction Electrician Solar Photovoltaic Systems Certified</div><div>Certificate # 0007S</div><div>HAVE A SUNNY DAY</div></div></div></div></div><div style="color: rgb(0, 0, 255); font-family: Capitals, sans-serif; font-size: 14px; "><br></div><span id="OLK_SRC_BODY_SECTION" style="color: rgb(0, 0, 255); font-size: 14px; font-family: Capitals, sans-serif; "><div><div>On 02/07/12 4:40 PM, "<a href="mailto:mark@hurshtown.com">mark@hurshtown.com</a>" <<a href="mailto:mark@hurshtown.com">mark@hurshtown.com</a>> wrote:</div></div><div><br></div><div><div><span style="font-family:Verdana; color:#000000; font-size:10pt;"><div style="color: rgb(0, 0, 0); font-size: 10pt; font-family: verdana, geneva; ">My 18V Milwaukee cordless hammer drill has no trouble driving a 5/16" lag into anything I've ever encountered.</div><div style="color: rgb(0, 0, 0); font-size: 10pt; font-family: verdana, geneva; ">If you put the lag anywhere near the middle of the rafter it won't split. If it splits, it must be some cheap stuff from Home Depot. </div><div style="color: rgb(0, 0, 0); font-size: 10pt; font-family: verdana, geneva; ">Only an engineer with no practical experience would insist on a pilot hole and the resulting reduction in holding strength. I'm assuming the IBC consists of a bunch of bureaucrats that value control over common sense.</div><div style="color: rgb(0, 0, 0); font-size: 10pt; font-family: verdana, geneva; ">In this instance flashing offers no benefit, and may even be counter-productive if incorrectly installed and it causes rain to collect under it. My experience is in northern Indiana where it does rain and the wind does blow. (Record 91 mph winds last Thursday.) Less severe weather than Michigan, but close.</div><div style="color: rgb(0, 0, 0); font-size: 10pt; "><span style="color: rgb(0, 0, 0); font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); display: inline !important; float: none; " mce_style="color: #000000; font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none; ">I use the best silicone caulk Menards has to offer. I've never worried about compatibility. It definitely won't dry up and crack away like the black roof cement some swear by and insist on. 15+ year old silicone caulk is yellowed a bit but that's the only change.</span></div><div style="color: rgb(0, 0, 0); font-size: 10pt; "><span style="color: rgb(0, 0, 0); font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); display: inline !important; float: none; " mce_style="color: #000000; font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none; ">If the silicone and shingle aren't getting along, I've never heard them complain.</span></div><div style="color: rgb(0, 0, 0); font-size: 10pt; "><span style="color: rgb(0, 0, 0); font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); display: inline !important; float: none; " mce_style="color: #000000; font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none; "><br></span></div><div style="color: rgb(0, 0, 0); font-size: 10pt; "><span style="color: rgb(0, 0, 0); font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); display: inline !important; float: none; " mce_style="color: #000000; font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none; ">Mark</span></div><div><span style="orphans: 2; text-align: -webkit-auto; text-indent: 0px; widows: 2; background-color: rgb(255, 255, 255); display: inline !important; float: none; " mce_style="color: #000000; font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none; "><font face="verdana" size="2">(Disclaimer: Portions of the preceding are the opinions of the author.)</font></span></div><div><span style="orphans: 2; text-align: -webkit-auto; text-indent: 0px; widows: 2; background-color: rgb(255, 255, 255); display: inline !important; float: none; " mce_style="color: #000000; font-family: verdana; font-size: 13px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; background-color: #ffffff; display: inline !important; float: none; "><font face="verdana" size="2"><br></font></span></div><div style="color: rgb(0, 0, 0); font-size: 10pt; "><div id="wmQuoteWrapper">
-------- Original Message --------<br>
Subject: Re: [RE-wrenches] L feet no flashing in shingle roof<br>
From: Dave Click <<a href="mailto:daveclick@fsec.ucf.edu">daveclick@fsec.ucf.edu</a>><br>
Date: Mon, July 02, 2012 10:29 am<br>
To: <a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a><br><br>
I always thought that installing lag screws was tough enough with pilot <br>
holes- I should hit the gym. I'm not a structural PE, but I think that <br>not drilling pilot holes violates the American Wood Council's National <br>Design Specs and therefore violates the IBC too. I would imagine that <br>
you'd be much more likely to split your trusses. IBC also requires <br>
flashings be used but at least around here inspectors never ask for it <br>(which makes sense- as you all know, Florida never sees wind or rain, <br>
and definitely not at the same time). What silicone do you use that's <br>
compatible with asphalt shingles?<br><br>
DKC<br><br>
On 2012/7/1 21:13, <a href="mailto:mark@hurshtown.com">mark@hurshtown.com</a> wrote:<br>
> In my 20 year experience of lagging down L feet on shingle roofs in<br>
> Indiana with a good dollop of silicone caulk under the foot, I've never<br>
> had an issue. No pre-drilling, just drive the lag home. Drilling a hole<br>
> first is not necessary, and reduces holding strength. No reason to make<br>
> a science project out of it and increase cost and labor.<br>
><br>
> Mark<br>
><br>
> -------- Original Message --------<br>
> Subject: Re: [RE-wrenches] L feet no flashing in shingle roof<br>
> From: Drake <<a href="mailto:drake.chamberlin@redwoodalliance.org">drake.chamberlin@redwoodalliance.org</a><br>
> <<a href="mailto:drake.chamberlin@redwoodalliance.org">mailto:drake.chamberlin@redwoodalliance.org</a>>><br>
> Date: Fri, June 29, 2012 3:09 pm<br>
> To: RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a><br>
> <<a href="mailto:re-wrenches@lists.re-wrenches.org">mailto:re-wrenches@lists.re-wrenches.org</a>>><br>
><br>
> Hi Jay,<br>
><br>
> There is no room for flashings. The L feet will go very close to the<br>
> skylights and the flashing would hit the edge of them. Plus there is<br>
> an existing array that was done by another installer that is done<br>
> with L feet only. The new array would be higher.<br>
><br>
><br>
>> And given that we have really good off the shelf approved flashed<br>
>> feet, why would you use anything else?<br>
>><br>
>> My 2 cents,<br>
>><br>
>> Jay<br>
>><br>
>> peltz power<br>
>><br>
>><br>
>> On Jun 29, 2012, at 5:16 AM, Glenn Burt wrote:<br>
>><br>
>>> We have used a variety of sealants over the years, and determined<br>
>>> simple Henry roofing cement is the best product for use on comp<br>
>>> roofing.<br>
>>><br>
>>> We also used to bend our own L-foot flashing, which we cut from<br>
>>> standard Al coil stock (before all the manufactured options were<br>
>>> available). This might be a good option for you in this case.<br>
>>><br>
>>><br>
>>><br>
>>> Glenn<br>
>>><br>
>>> *From:* <a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">re-wrenches-bounces@lists.re-wrenches.org</a><br>
>>> <<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">mailto:re-wrenches-bounces@lists.re-wrenches.org</a>><br>
>>> [<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">mailto:re-wrenches-bounces@lists.re-wrenches.org</a>] *On Behalf Of<br>
>>> *Drake<br>
>>> *Sent:* Thursday, June 28, 2012 6:40 PM<br>
>>> *To:* RE-wrenches<br>
>>> *Subject:* [RE-wrenches] L feet no flashing in shingle roof<br>
>>><br>
>>> I'm quoting a job that has an existing array with L feet bolted<br>
>>> down to a shingle roof with no flashings. I want to match the<br>
>>> height of the existing array. Also some modules are being worked<br>
>>> in around skylights where it is unlikely that room would be<br>
>>> available for flashings to center over rafters.<br>
>>><br>
>>> I've always used flashings. Would it be completely crazy to<br>
>>> follow suit of the existing array and bolt L feet straight to the<br>
>>> shingle roof with good roof sealant? If so, how would you seal it?<br>
> Drake Chamberlin<br>
> ATHENS ELECTRIC LLC<br>
> OH License 44810<br>
> CO license 3773<br>
> NABCEP Certified PV<br>
> ------------------------------------------------------------------------<br>
> _______________________________________________<br>
> List sponsored by Home Power magazine<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
> <<a href="mailto:RE-wrenches@lists.re-wrenches.org">mailto:RE-wrenches@lists.re-wrenches.org</a>><br>
><br>
> Options & settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive:<br>
> <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
><br>
> List rules & etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br>
> <<a href="http://www.re-wrenches.org/etiquette.htm>">http://www.re-wrenches.org/etiquette.htm></a>;<br>
><br>
> Check out participant bios:<br>
> <a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a> <<a href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a>><br>
><br>
><br>
><br>
> _______________________________________________<br>
> List sponsored by Home Power magazine<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
><br>
> Options& settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
><br>
> List rules& etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br>
><br>
> Check out participant bios:<br>
> <a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a><br>
><br>
_______________________________________________<br>
List sponsored by Home Power magazine<br><br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br><br>
Options & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>
List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br><br>
Check out participant bios:<br><a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a><br><br></div></div><blockquote id="replyBlockquote" webmail="1" style="border-left-width: 2px; border-left-style: solid; border-left-color: blue; margin-left: 8px; padding-left: 8px; font-size: 10pt; color: black; font-family: verdana; "></blockquote></span></div></div>
_______________________________________________
List sponsored by Home Power magazine
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Options & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
</span></body></html>