<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">Class 'A' amplifier power output stages idle at 50% of their rated maximum output power. Add the power consumed by other aspects of the amplifier's electronics and the total idle wattage could easily run 60% or more of the maximum output wattage rating for the entire amplifier -- and as William points out -- consume this much energy with absolutely no output audio. Class A amps are the most linear of all classes of amplifier, meaning the least distorted, but are also the most power hungry.<br><br>Due to the way high-power audio amplifiers and their speakers are utilized, audio equipment people are loathe to turn equipment off until they're done with the event. If the solar electric system can't handle the load .. no matter how insane or wasteful the load happens to be .. they'll go out and rent a big generator that can. This is based on
past experience ....<br><br>Dan<br><br><br>--- On <b>Thu, 4/28/11, William Miller <i><william@millersolar.com></i></b> wrote:<br><blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"><br>From: William Miller <william@millersolar.com><br>Subject: Re: [RE-wrenches] PV powered music festival<br>To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org><br>Cc: "RE-wrenches" <re-wrenches@lists.re-wrenches.org><br>Date: Thursday, April 28, 2011, 10:58 AM<br><br><div id="yiv2066937912">
<font size="3">Friends:<br><br>
I can not speak to the subject of tube amplifiers specifically, but in my
experience, I have found that a PA system draws almost as much idling as
it does during a performance. I suggest that if you need to
conserve battery power, after sound check that the amps be shut
down. Sound crew hates this, they want to have the system blasting
to prevent anyone from enjoying a decent conversation, but it is one way
to prevent a shut down during the encore.<br><br>
William Miller<br><br>
<br><br>
<br>
At 10:05 PM 4/27/2011, R Ray Walters wrote:<br>
</font><blockquote type="cite" class="yiv2066937912cite" cite=""><font size="3">Dan;<br><br>
Your system sounds great. I'd love to hear it sometime.<br>
Just one question: how come no tube amps?<br>
You're going to have some guitar players screaming; most of the best
guitar amps are all tube these days.<br>
I know they waste a lot of power, but they're usually small compared to
the PA system.<br>
I've measured a few with a no load draw in the 20 to 40 watt range, maybe
peaking at 100 watts. (Marshall 100w head)<br>
I would think the Exeltech would make it sound better than they've ever
heard.<br>
Have you had problems?<br><br>
R. Walters<br>
<a rel="nofollow" ymailto="mailto:ray@solarray.com" target="_blank" href="/mc/compose?to=ray@solarray.com">ray@solarray.com</a><br>
Solar Engineer<br>
</font></blockquote>
</div><br>-----Inline Attachment Follows-----<br><br><div class="plainMail">_______________________________________________<br>List sponsored by Home Power magazine<br><br>List Address: <a ymailto="mailto:RE-wrenches@lists.re-wrenches.org" href="/mc/compose?to=RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br><br>Options & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>List rules & etiquette:<br>www.re-wrenches.org/etiquette.htm<br><br>Check out participant bios:<br>www.members.re-wrenches.org<br><br></div></blockquote></td></tr></table>