<html>
<body>
<font size=3>Aaron:<br><br>
I might be able to offer some insight I have developed with some previous
design evolutions, but you forgot to include an essential piece of
information: Curvature over N-S or E-W?<br><br>
William<br><br>
PS: Also, Off-grid or Grid-tie?<br><br>
wm<br><br>
<br><br>
At 11:18 AM 1/22/2011, you wrote:<br>
<blockquote type=cite class=cite cite>It depends upon the curature of the
roof. If the cure is great enough run rails horizonal and mount
portrate, if the curature is less and your modules can mount on the short
side, same plan mounting landscape. . <br><br>
<br>
</font><font face="tahoma" size=2><b>From:</b> Aaron Mandelkorn
<reosolar@gmail.com><br>
<b>To:</b> re-wrenches@lists.re-wrenches.org<br>
<b>Sent:</b> Sat, January 22, 2011 10:40:46 AM<br>
<b>Subject:</b> [RE-wrenches] Barrel Roof Mounting<br>
</font><font size=3><br>
Just wondering if anyone has any info about mounting systems designed for
barrel roofs. I have been looking into this for a little while and
can't seem to find any commercially available mounting solution to this
roof type. Has anyone else had any experience mounting to this roof
type? My first thought was to create some kind of raised flat
structure to mount to using unistrut and standoffs and maybe a top down
mounting system on top of it? Any ideas? <br>
<br>
Aaron Mandelkorn<br>
Renewable Energy Outfitters<br>
P.O. Box 65 <br>
Salida CO 81201<br>
(970)596-3744<br>
<a href="mailto:reosolar@gmail.com">reosolar@gmail.com</a><br>
<a href="http://www.reosolar.com/" eudora="autourl">www.reosolar.com</a></font></blockquote></body>
</html>