<html>
<body>
Friends:<br><br>
I have managed to confuse myself on the proper steps for equalizing
batteries with the SW inverter and I am hoping I can get some
clarification. The instructions indicate you can't start an
equalization manually. Instead it says that you must wait until the
inverter starts automatically after setting the control to EQ.<br><br>
I very much prefer to have my customers equalize at a time specific so
they monitor the process was successful and know it was successful.
I thought I remembered that you could start the generator from the
control panel and then engage EQ, but with at least one client, the
generator shuts down right away. We made a brief experiment with
starting the generator from the gen set itself and then engaging
EQ. My client was leaving the premises shortly after I gave these
new instructions so we aborted the EQ until another day. In the
meantime, I'd appreciate any input any of you may have as to the best way
to EQ with an SW inverter using the generator input.<br><br>
Thanks,<br><br>
William Miller<br><br>
<br>
PS: This inverter requires a three-wire start connection with the
"glow-stop" setting.<br><br>
Wm<br><br>
<br>
<x-sigsep><p></x-sigsep>
<font size=3><u>Please note new e-mail address and domain:<br><br>
</u>William Miller <br>
Miller Solar<br>
Voice :805-438-5600<br>
email: william@millersolar.com<br>
<a href="http://millersolar.com/" eudora="autourl">http://millersolar.com<br>
</a>License No. C-10-773985<br>
</font></body>
</html>