<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<STYLE><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></STYLE>
<META content="MSHTML 6.00.2900.6036" name=GENERATOR></HEAD>
<BODY class=hmmessage>
<DIV><SPAN class=937382823-20102010><FONT face=Arial
size=3>Benn</FONT></SPAN></DIV>
<DIV><SPAN class=937382823-20102010><FONT face=Arial size=3>just bear in mind
that any adjustment of the module height, must be performed by
turning a jam nut under the S5-PV clamps mounting surface and
will need to be done from below using an open-end wrench! If the ribs are pretty
level that may not be such a chore. But I've seen some pretty unlevel
metal ribs on older roofs. </FONT></SPAN></DIV>
<DIV><SPAN class=937382823-20102010><FONT face=Arial size=3>Carry along a 10-12
foot rail section for a straightedge to get the heights on the money before you
start to clamp modules. </FONT></SPAN></DIV>
<DIV><SPAN class=937382823-20102010><FONT face=Arial
size=3></FONT></SPAN> </DIV>
<DIV><SPAN class=937382823-20102010><FONT face=Arial size=3>Jim
Duncan</FONT></SPAN></DIV>
<DIV><SPAN class=937382823-20102010><FONT face=Arial size=3>North Texas
Renewable Energy</FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B>
re-wrenches-bounces@lists.re-wrenches.org
[mailto:re-wrenches-bounces@lists.re-wrenches.org]<B>On Behalf Of </B>benn
kilburn<BR><B>Sent:</B> Wednesday, October 20, 2010 5:18 PM<BR><B>To:</B>
Wrenches<BR><B>Subject:</B> Re: [RE-wrenches] Mounting Enphase when using
S-5-PV Clamps<BR><BR></FONT></DIV>Not a lot of you guys in the field today
'eh? I was just checking a spec on my laptop and noticed i had a
wireless signal and a mailbox full of great feedback, thanks again
everyone!!!
<DIV><BR></DIV>
<DIV> I'll go over all the details from everyone a little more when i'm
done on site for the day. For a few of you i just wanted to show you
this link to the S-5-PV clamp, which is different from just the S-5! clamp
> <A href="http://www.S-5.com/clamps/index_686.cfm">Click here
to learn more.</A> < The S-5-PV does not need rails, the mod
frames sit on the 'mounting disc' which can accommodate one or two modules.
BUT, with the Enphase system, this leave no where to mount the
inverters. Bill made a good point; save this mounting method for string
inverter systems. </DIV>
<DIV>We are now planning this project using just the S-5 clamp/L-foot/rail
system. No problems. </DIV>
<DIV><BR></DIV>
<DIV>Back at 'er!<BR>
<DIV>benn<BR><SPAN class=ecxecxecxecxEC_Apple-style-span
style="COLOR: rgb(0,32,96)"><FONT class=ecxApple-style-span
face="'Franklin Gothic Medium'">DayStar Renewable Energy
Inc. </FONT></SPAN>
<DIV>
<DIV><FONT class=ecxApple-style-span
face="'Franklin Gothic Medium'">benn@daystarsolar.ca</FONT></DIV>
<DIV><FONT class=ecxApple-style-span
face="'Franklin Gothic Medium'">780-906-7807 </FONT></DIV>
<DIV><FONT class=ecxApple-style-span face="'Franklin Gothic Medium'">HAVE A
SUNNY DAY </FONT></DIV>
<DIV><BR></DIV></DIV></DIV></DIV></BLOCKQUOTE></BODY></HTML>