Hello, Wrenches~<div><br></div><div>Please see the photo on page 48 of the latest <u>Home Power</u>magazine (#138). This shows aluminum fins with an extruded clip into which Rehau type radiant floor tubing can be clipped.</div>

<div><br></div><div>Where can I get these parts for resale?</div><div><br></div><div>Have any of you observed an installation where this approach actually worked OK? I&#39;m sure the aluminum fin would extract heat from the tubing OK but the wood subfloor won&#39;t extract heat from the aluminum very quickly. Insulation between the aluminum fin and the air below it might help, right?</div>

<div><br></div><div>My client wants to retrofit solar heat to an existing home which does not have the in-floor radiant tubing embedded in lightweight concrete--the more common way to do a radiant floor. He had planned to drive existing baseboard radiators but the higher temperature which those require (compared to a radiant floor) led to this pursuit.</div>

<div><br></div><div>Thanks in advance,</div><div><br clear="all">Mick Abraham, Proprietor<br><a href="http://www.abrahamsolar.com">www.abrahamsolar.com</a><br><br>Voice: 970-731-4675<br>
</div>