<font face="arial" size="4">So you can get others to install your designs? I would never touch materials I do not sell, or install a system I did not design... and I am amazed anyone would.<br><br>Todd<br><br><br><br>On Monday, December 21, 2009 12:56pm, "Brian White" &lt;brianw@eagleroofing.com&gt; said:<br><br>&gt; Thanks to all who have posted.<br>&gt; <br>&gt; To answer a couple of questions that have been posted.<br>&gt; <br>&gt; Eagle Roofing does not have a contractor's license, as we do not perform the<br>&gt; installation. We work with electrical contractors and roofing contractors in the<br>&gt; area of a given project. Our services do include the design and documentation of<br>&gt; the system, and "help" our partners pull the permit.<br>&gt; <br>&gt; We have tried several of the approaches mentioned here, i.e. the system consist of<br>&gt; certified products, and why do we have to re-test certified products, etc.<br>&gt; However, this plan checker seems very firm on their position. Pressing further, we<br>&gt; asked them to provide the criteria for the test they are requesting, and amazingly<br>&gt; enough they could not produce any. They also said that just a wet stamp of the<br>&gt; plans would not suffice.<br>&gt; <br>&gt; We have completed previous installations in this local within the last year and<br>&gt; were not faced with this requirement, even though it was originally adopted in<br>&gt; 2007.<br>&gt; <br>&gt; The following is a verbal description of what they want done;<br>&gt; <br>&gt; He said that a registered electrical engineer has to be onsite when the<br>&gt; installation of this system is completed.  This engineer has to test the power<br>&gt; (wattage) and load (amps) to make sure that the output is within the parameters of<br>&gt; which this system is design for, and finally this person has to write a report<br>&gt; with his PE stamp to certify that this system is working properly.<br>&gt; <br>&gt; We did get as far as to get him to agree that it did not seem relevant, as he said<br>&gt; he was going to look into the ordinance a little further and might make some<br>&gt; revisions to it.  However, for now, he won't budge on this ordinance because it's<br>&gt; been in the city code before he came on board.<br>&gt; <br>&gt; Also, some additional system information. 3 strings of 38 PV Tiles (Suntech 50<br>&gt; Watt BIPV Roof Tile) with one PV Powered 4800 Watt inverter in a grid tied set up.<br>&gt; Not exactly a complex system.<br>&gt; <br>&gt; I will provide additional updates as I get them.<br>&gt; <br>&gt; Thanks again,<br>&gt; Brian C. White<br>&gt; Design Engineer - PV Systems<br>&gt; <br>&gt; Eagle Roofing Products<br>&gt; 120 North Auburn Street - Suite 212<br>&gt; Grass Valley, CA  95945<br>&gt; Phone: 530-273-2948<br>&gt; Cell: 530-575-5550<br>&gt; e-mail: brianw@eagleroofing.com &lt;mailto:brianw@eagleroofing.com&gt;<br>&gt; <br>&gt; <br>&gt; <br>&gt; ________________________________<br>&gt; <br>&gt; From: re-wrenches-bounces@lists.re-wrenches.org on behalf of William Miller<br>&gt; Sent: Fri 12/18/2009 3:05 PM<br>&gt; To: RE-wrenches<br>&gt; Subject: Re: [RE-wrenches] Solar System Certification<br>&gt; <br>&gt; <br>&gt; Brian:<br>&gt; <br>&gt; I looked up the Municipal Codes<br>&gt; (http://www.ci.yorba-linda.ca.us/~ci26/how-do-i/get/get-city-codes) and this<br>&gt; requirement is right in there.  I hope you have a provision in your contract that<br>&gt; allows for additional billing for unanticipated engineering fees.  Everyone<br>&gt; should.  If you need language, contact me off line.<br>&gt; <br>&gt; Fortunately I have never experienced anything like this.  This requirement sounds<br>&gt; unreasonable.  It is sort of like asking an air conditioning contractor to have<br>&gt; the air conditioning unit tested in the field.  Individual solar components are<br>&gt; listed.  The combining of the components is facilitated by the manufacturers<br>&gt; specifications and on-line sizing tools. Having said that, an amateur can easily<br>&gt; screw the design and installation of even the most simple grid-tie system.  This<br>&gt; provision is the ultimate consumer protection.  It sounds onerous at first but<br>&gt; does have a benefit.<br>&gt; <br>&gt; Good luck, and give us a hint how much this certification costs.<br>&gt; <br>&gt; William Miller<br>&gt; <br>&gt; <br>&gt; <br>&gt; <br>&gt; At 01:31 PM 12/18/2009, you wrote:<br>&gt; <br>&gt; <br>&gt;        I am curious if any of you have had to deal with this issue before.<br>&gt; <br>&gt;        The following is an item we got back from the City of Yorba Linda for a Plan<br>&gt; Check correction:<br>&gt; <br>&gt; <br>&gt;         All electrical solar systems shall be tested and approved by a California<br>&gt; Registered Electrical Engineer.  The engineer shall furnish a report stating<br>&gt; their name, registration number, its date of expiration, address where the<br>&gt; testing occurred and the dates of testing and approval.  Such report shall be<br>&gt; presented to the City inspector for approval at the time of final inspection. <br>&gt; (YLMC 15.28.020)  Note on the plans.<br>&gt; <br>&gt;     All experiences and suggestion are appreciated.<br>&gt; <br>&gt; <br>&gt; <br>&gt;      Best Regards,<br>&gt;         Brian C. White<br>&gt;        Design Engineer - PV Systems<br>&gt; <br>&gt;       Eagle Roofing Products<br>&gt;        120 North Auburn Street - Suite 212<br>&gt;   Grass Valley, CA  95945<br>&gt;       Phone: 530-273-2948<br>&gt;   Cell: 530-575-5550<br>&gt;    e-mail: brianw@eagleroofing.com &lt;mailto:brianw@eagleroofing.com&gt;<br>&gt; <br>&gt;     _______________________________________________<br>&gt;       List sponsored by Home Power magazine<br>&gt; <br>&gt;      List Address: RE-wrenches@lists.re-wrenches.org<br>&gt; <br>&gt;    Options &amp; settings:<br>&gt;   http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<br>&gt; <br>&gt;       List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<br>&gt; <br>&gt;   List rules &amp; etiquette:<br>&gt;       www.re-wrenches.org/etiquette.htm<br>&gt; <br>&gt;  Check out participant bios:<br>&gt;   www.members.re-wrenches.org &lt;http://www.members.re-wrenches.org/&gt;<br>&gt; <br>&gt; <br>&gt;         No virus found in this incoming message.<br>&gt;      Checked by AVG - www.avg.com &lt;http://www.avg.com/&gt;<br>&gt;      Version: 9.0.717 / Virus Database: 270.14.113/2573 - Release Date: 12/17/09<br>&gt; 23:35:00<br>&gt; <br>&gt; Please note new e-mail address and domain:<br>&gt; <br>&gt; William Miller<br>&gt; Miller Solar<br>&gt; Voice :805-438-5600<br>&gt; email: william@millersolar.com<br>&gt; http://millersolar.com<br>&gt; &lt;http://millersolar.com/&gt; License No. C-10-773985<br>&gt; <br>&gt; <br>&gt; _______________________________________________<br>&gt; List sponsored by Home Power magazine<br>&gt; <br>&gt; List Address: RE-wrenches@lists.re-wrenches.org<br>&gt; <br>&gt; Options &amp; settings:<br>&gt; http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<br>&gt; <br>&gt; List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<br>&gt; <br>&gt; List rules &amp; etiquette:<br>&gt; www.re-wrenches.org/etiquette.htm<br>&gt; <br>&gt; Check out participant bios:<br>&gt; www.members.re-wrenches.org<br>&gt; <br>&gt; <br></font>