<html>
<body>
<font size=3>August:<br><br>
I suggest the use of EMT with proper fittings to protect high voltage,
high amperage DC Wiring on rooftops. Sure it is time consuming, but
high quality, reliable craftsmanship will always be thus.<br><br>
William Miller<br><br>
<br><br>
<br><br>
<br><br>
At 11:07 AM 10/8/2009, you wrote:<br><br>
<blockquote type=cite class=cite cite>Hi Wrenches,<br>
<br>
I\u2019m looking for fresh ideas on how to run USE-2 wires between subarrays
on rooftops. Let\u2019s say we have a flat roof commercial system with dozens
of separate rows of modules. How would you folks run the USE-2 wiring
between these arrays? We\u2019ve been using J-boxes and EMT which is robust
but time consuming. I\u2019ve also used strut with a cap strip on the top
which effectively makes a wire raceway but it is difficult to properly
ground both ends of the raceway and is also time consuming. <br>
<br>
Looking forward to hearing your ideas. Best, August <br>
</blockquote>
<x-sigsep><p></x-sigsep>
<u>Please note new e-mail address and domain:<br><br>
</u>William Miller <br>
Miller Solar<br>
Voice :805-438-5600 Fax:
805-438-4607<x-tab> </x-tab><br>
email: william@millersolar.com<br>
<a href="http://millersolar.com/" eudora="autourl">http://millersolar.com<br>
</a>License No. C-10-773985<br>
</font></body>
</html>