<font face="arial" size="4">Hmmm, I wonder how the birds can sit on those same HV wires and do just fine? If a wire is not referenced to the ground you are standing on, touching it would not give you a shock unless you were also in contact with the other conductor it is referenced to.<br><br>Todd<br><br>On Friday, July 24, 2009 11:23am, "Darryl Thayer" &lt;daryl_solar@yahoo.com&gt; said:<br><br>&gt; <br>&gt; The reason for grounding to limit the hazards associated with fault conditions. <br>&gt; If a utility source is unintensionally connected to high voltage the pair of wires<br>&gt; can be at elevated voltage.  example would be if a 13,000 volt line falls onto a<br>&gt; 120 volt line, the 120 volt line can be raised to 13,000 volts, and the victium<br>&gt; would be fried.  So we ground such that the 120 line can not get higher than 120<br>&gt; volts above ground.<br>&gt; <br>&gt; The reference to ground is because we are referenced to ground as we stand bare<br>&gt; foot and<br>&gt; <br>&gt; Darryl<br>&gt; <br></font>