In a message dated 04/19/2001 8:41:07 PM Pacific Daylight Time,
Solarwks@aol.com writes:
I had a problem with a PS remote, digits where disappearing, if I turned the
inverter off via the DC disconnect all the numbers and letters came back.
I
called Trace a couple of times about it and ultimately they recommended I
cut the ground wire in the cable to the meter and this solved the problem.
I
had the meter recessed in the wall directly above the inverter. I suspect
magnetic fields were causing problems.
Carl Hansen
Carl, I have had the same experience with two separate installations. I think
the problem is endemic to the design. The display would periodically get
scrambled. Pressing the reset would return but since I experienced it twice
and others on this list also report the problem, I suggest the problem is not
with the installation or noise but something else. Seems to me that Trace
needs to fix this. Its a lot of money to spend on something that works half
ass. I will not be using them or recommending them till this problem is
fixed. What say you Trace?
Best, Don
- - -
To send a message:
RE-wrenches@topica.com
Archive of previous messages:
http://www.topica.com/lists/RE-wrenches/
List rules & etiquette:
http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios:
www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator:
michael.welch@homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe@topica.com
This email was sent to: michael.welch@homepower.com
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01
==^================================================================