Re: suggestions for controller needed [RE-wrenches] Todd,

Bob Maynard is right on with the C12.  We have used them several times in small sign lighting systems.  All you need besides the C12 is fuses for the load, battery, and PV Module.

Good Luck
Travis Creswell
Ozark Solar
----------
From: Todd Cory <toddcory@jps.net>
To: Wrenches <RE-wrenches@topica.com>
Subject: suggestions for controller needed [RE-wrenches]
Date: Tue, Mar 21, 2000, 10:07 AM


Hi everyone,

I am looking for suggestions for a low current 12 volt PV controller. This will be for a small standalone night time lighting system, with a 5 watt compact fluorescent for the load and a 75 watt PV. It would need to have a LV disconnect AND provisions for shutting the load off during daylight hours.

Does anyone know of dependable controllers that are capable of these features, or will I have to buy and configure them separately?

Thanks, Todd
--
Todd Cory
KE6SXS
toddcory@jps.net
Bald Mountain Solar
P.O. Box 689
Mt. Shasta, Ca. 96067
(530) 926-1079 - - - - - - - To send a message to the list use: To view an archive of previous messages go to: Hosted by Home Power magazine: for info contact: _________________________________________________________ Enlighten your in-box.         http://www.topica.com/t/15