<div dir="auto">Steve pulled that one out of the old timers closet! Had forgotten about “Magic Stack” and the reason it was even a thing!</div><div dir="auto"><br></div><div dir="auto">Firmware issues will not let you stack the SW ‘s as you hope to. Even if you use a hack and get it done it will not be a reliable setup for a customer.</div><div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Wed, Jul 15, 2026 at 9:40 AM Steve Higgins via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>To <span style="border-style:none;background:none">make them stack, they both have to</span> have the same firmware. Unfortunately, the SW5548 and the SW+5548 had very different firmware, and I don't think you'll be able to connect them up with a SWI/PAR Kit.</div><div><br></div><div>You might be able to make them a "Magic Stack" for 120/240, but once you lose the generator/grid input, and depending on the loads, the waveforms will drift out of phase, and you could get a backfeed. </div><div><br></div><div>"Magic Stacking" <span style="border-style:none;background:none">was when you wired them in 120/240 and used</span> a generator or grid power to sync the output waveforms. That waveform would stay synced for quite some time, days if not weeks, as long as you didn't load them<span style="border-style:none;background:none"> more than</span> 75%.</div><div><br><br></div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><table style="width:490px;border-width:1px;margin:0px auto 0px 0px;height:155.5px" border="1"><colgroup><col style="width:123px"><col style="width:366px"></colgroup>
<tbody>
<tr style="height:62px">
<td style="text-align:center;vertical-align:middle;border-style:hidden">
<div style="text-align:left"><img style="display:block;margin-left:auto;margin-right:auto" src="https://storage.googleapis.com/bucket-images-sig/RollsbySurrette.jpg" alt="" width="100"></div>
</td>
<td style="border-style:hidden" rowspan="2">
<div style="text-align:left"><span style="color:rgb(216,0,29);font-family:arial,helvetica,sans-serif;font-size:8pt"><strong>Steve Higgins</strong> <span style="color:rgb(0,0,0)"><strong>⋅</strong></span> <span style="color:rgb(0,0,0)"><strong>Technical Services Manager</strong></span></span></div>
<div style="text-align:left"><span style="font-family:arial,helvetica,sans-serif;font-size:7pt;color:rgb(216,0,29)"><strong>t</strong> <span style="color:rgb(0,0,0)">+1.902.597.4020</span> <strong>m</strong> <span style="color:rgb(0,0,0)">+1.206.790.5840</span></span></div>
<div style="text-align:left"><span style="font-family:arial,helvetica,sans-serif;font-size:7pt;color:rgb(216,0,29)"><strong>f</strong> <span style="color:rgb(0,0,0)">+1.902.597.8447</span> <strong>e</strong> <span style="color:rgb(0,0,0)"><a href="mailto:steve@surrette.com" target="_blank">steve@surrette.com</a></span></span></div>
</td>
</tr>
<tr style="height:30.5px">
<td style="text-align:center;vertical-align:middle;border-style:hidden">
<div style="text-align:center"><span style="color:rgb(216,0,29);font-family:arial,helvetica,sans-serif;font-size:8pt"><strong><span style="font-family:arial,helvetica,sans-serif;font-size:7pt;color:rgb(216,0,29)"><span style="color:rgb(0,0,0)"><img src="http://cdn3.iconfinder.com/data/icons/free-social-icons/67/facebook_square_gray-24.png" alt="" width="24" height="24"><img src="https://cdn3.iconfinder.com/data/icons/free-social-icons/67/instagram_square-24.png" width="24" height="24"><img src="http://cdn3.iconfinder.com/data/icons/free-social-icons/67/youtube_square_gray-24.png" alt="" width="24" height="24"><img src="http://cdn3.iconfinder.com/data/icons/free-social-icons/67/linkedin_square_gray-24.png" alt="" width="24" height="24"></span></span></strong></span></div>
</td>
</tr>
<tr style="height:63px">
<td style="border-style:hidden" colspan="2">
<div><hr></div>
<div style="text-align:justify;line-height:.75"><span style="font-family:arial;font-size:6pt">CONFIDENTIALITY: The information transmitted herein is intended only for the addressee and may contain confidential, proprietary and/or privileged material. Any unauthorized review, distribution or other use of or the taking of any action in reliance upon this information is prohibited. If you receive this email in error, please contact the sender and delete or destroy this message and all copies.</span></div>
<div><hr></div>
</td>
</tr>
</tbody>
</table>
<p> </p></div></div><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jul 14, 2026 at 8:26 PM Ray Walters via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><u></u>
<div>
<p>I never liked the original SW5548. It had different firmware and
actually can't surge as much as an SW4048. The 5548 does have a
very heavy transformer, so they would be good for a heavy
continuous load that didn't surge much on startup. They're hard
to put up on a wall. </p>
<p>I don't know anything about the SW+, I had switched to Outback
back then. Did you read in the SW+ manual that it could be
stacked with the SW? Unless they designed that into it, I'm
guessing they wouldn't stack.</p>
<p>Ray Walters<br>
Remote Solar</p>
<div>On 7/14/2026 8:01 PM, All Solar via
RE-wrenches wrote:<br>
</div>
<blockquote type="cite">
<div dir="auto">Has anyone tried to stack an SWPlus 5548 with an
SW5548?</div>
<div dir="auto">I’m trying to make sure, before I try harder to
sell the SWplus </div>
<div dir="auto"><br>
</div>
<div dir="auto"><br>
</div>
<div dir="auto"><br>
</div>
<div dir="auto"><br clear="all">
<div dir="auto">
<div dir="ltr" class="gmail_signature">Jeremy Rodriguez <br>
All Solar Inc. <br>
Penrose CO<br>
719-276-4954<br>
Established 1998 </div>
</div>
</div>
<div><br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Wed, Jul 8, 2026 at
8:27 AM All Solar <<a href="mailto:allsolarpenrose@gmail.com" target="_blank">allsolarpenrose@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="auto">Can anyone tell me if it’s possible to stack
an SW Series Inverter with an SW Plus Series for 120-240V?
</div>
<div dir="auto">What’s Required, if So. <br clear="all">
<br>
Thank You </div>
<div dir="auto"><br clear="all">
<div dir="auto">
<div dir="ltr" class="gmail_signature">Jeremy Rodriguez <br>
All Solar Inc. <br>
Penrose CO<br>
719-276-4954<br>
Established 1998 </div>
</div>
</div>
</blockquote>
</div>
</div>
<br>
<fieldset></fieldset>
<pre>_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank">http://re-wrenches.org</a>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
There are two list archives for searching. When one doesn't work, try the other:
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">http://www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" target="_blank">http://www.members.re-wrenches.org</a>
</pre>
</blockquote>
</div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>