<div dir="ltr"><div class="gmail_quote gmail_quote_container"><div>One of my installers in western CO uses a lifting dolly -- he does a lot of double stacked setups with 6 to 12 batteries in a system, with lower row of batteries 2 or 3 inches off the ground and an upper row of batteries about 3 feet off the ground.  </div><div><br></div><div>EG4 sells a lifting dolly especially made for their wallmount batteries for about $1100, and Vevor has a few models of lifting dollies for around $400.  They are commonly used for woodstoves and safes and boilers and such as well, not just batteries.</div><div><br></div><div>Zeke</div><div><br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<br>
For those of you that have wall mounted the PF 16 battery, can you share<br>
techniques and or equipment methods?<br>
I can get my engine hoist into the building and I was hoping to sling the<br>
battery to get it up there. Plan is to mount one above another with 10-12?<br>
of clearance.<br>
 Does MidnitePower make anything for this ?<br>
<br>
Jeremy Rodriguez<br>
All Solar Inc.<br>
Penrose CO<br>
719-276-4954<br>
Established 1998</blockquote></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr">Zeke Yewdall<div>PV Engineer</div><div>NABCEP #031508-89</div><div><a href="mailto:zeke@darkforestsolar.com" target="_blank">zeke@darkforestsolar.com</a></div><div>303-523-3592</div></div></div></div></div></div>