<div dir="auto"><div>I inherited am off-grid service client with four FXR3048A configured in 120/240 split phase with one master and one slave per leg. I believe I configured all of the AC input charging parameters correctly, requesting max charge rate from each inverter. However, when AC input is present (from a generator) the masters will bulk charge, but the slaves do not charge at all. The slaves do share the load, but show 0.0kW for charging.</div><div dir="auto"><br></div><div dir="auto">Any ideas?</div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div><div data-smartmail="gmail_signature"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><b></b></div></div></div></div></div></div></div></div>