<div dir="ltr"><div>Hi wrenches,<br>The Renon Xcellent Plus battery unit has a special connector that is rated for 2/0 CU battery cables, but when trying to build cable with fine-stranded copper (type MTW), it is extremely difficult to get all the strands into the connector (and is a known complaint to their tech support)<br>Anyhow have any tips or tricks for fitting finely stranded copper conductors into this connector?<br><br>-Travis</div><div><br></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr">Travis Knipple<div>Senior Engineer</div><div>Hudson Solar Solutions LLC</div><div>Rhinebeck, NY 12572</div><div>518-539-8040 x408 | <a href="mailto:travis@hudsonsolarsolutions.com" target="_blank">travis@hudsonsolarsolutions.com</a></div><div><br></div><div><img src="https://ci3.googleusercontent.com/mail-sig/AIorK4wuT0Jf3z34mlt7_aUK-QOs2RIbM5kO1oBpUVNKSFuc5ADydVvuRPMkmhWoT1Bglre_AATVNHA1BkN_" width="96" height="75"></div><div>PVIP# PV-111821-013612</div></div></div></div>