<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div dir="ltr"></div><div dir="ltr">I don’t agree about either the trace/xantrex SW or the newer Schneider SW or Outback fx not having a LBCO that will work with LFP. </div><div dir="ltr"><br></div><div dir="ltr">The SW has a LBCO of between 16-32v. </div><div dir="ltr"><br></div><div dir="ltr">Every LFP battery I’ve used the LBCO of all of those inverters is well within the parameters of LFP batteries. </div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr">I guess there are battereis im not familiar with that have a LBCO outside of those parameters. </div><div dir="ltr">Jay</div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br><blockquote type="cite">On Dec 22, 2025, at 1:32 PM, Zeke Yewdall via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><div dir="ltr"><div>I've done a lot of Mate3s swaps over the years, as they are not the most reliable piece of equipment, and I never involved outback in it. If I recall, you just link the new mates mac ID to the plant in opticsRE, and delete the old one. Whether you lose all of the old data when doing that I can't remember -- probably so. Perhaps just name the old one old data, and keep it on the portal rather than deleting it, and use the new one going forwards.</div><div><br></div><div>Zeke</div><div><br></div><div><br></div><div>Subject: [RE-wrenches] </div><div><br></div><div><br>Message-ID:<br>
<CAAgpqUO7J2g380v8VbE472C5U=rhD=<a href="mailto:kE8-yyiW%2B_1oNaKcoBrg@mail.gmail.com" target="_blank">kE8-yyiW+_1oNaKcoBrg@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Friends:<br>
<br>
I need to swap a Mate3s. This requires help from Outback. They are not<br>
answering texts, emails or phone calls.<br>
<br>
Is there any way one can make this swap without Outback?<br></div><div><br></div></div>
<span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: http://re-wrenches.org</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</span><br><span>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>http://www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>http://www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></body></html>