<div dir="ltr"><div dir="ltr"><div><div class="gmail_default" style="font-family:arial,helvetica,sans-serif">I should also mention that this is an invitation to go down the rabbit hole of 2020 NEC 225.30 if anyone is so inclined. :)</div><div class="gmail_default" style="font-family:arial,helvetica,sans-serif"><br></div><div class="gmail_default" style="font-family:arial,helvetica,sans-serif">In my scenario, the power production source for this off-grid home is an auxiliary building where the inverters and batteries are located. The AC Coupled solar is on the main house. If I were to run a separate feeder for the inverter loads and AC Coupled solar, that would be two feeders "supplying" a separate building. The AHJ argument may become, are any of the 225.30(A) subsections applicable? They like to think that a condition of subsection A needs to be met for subsection B to apply, which is not the case. Two feeders are allowed, as long as they originate from the same load center (the GridBOSS in this case). As long as the disconnects at the load end of the feeder are single disconnects per feeder and they are grouped, 225.30(B) is satisfied. You do not need to comply with ALL subsections of 225.30 for an exception to the single feeder rule to apply - only one subsection.</div><div class="gmail_default" style="font-family:arial,helvetica,sans-serif"><br></div><div class="gmail_default" style="font-family:arial,helvetica,sans-serif">If anyone thinks I'm misreading this, please let me know. The section has only existed since the 2020 code, so some of us old-timers still think that there is a hard rule about a single feeder. I have done a lot of research on this, and I believe I am interpreting it correctly.</div><br clear="all"></div><div><div dir="ltr" class="gmail_signature"><div dir="ltr"><br>Jason Szumlanski<div><span style="color:rgb(51,51,51);font-family:Roboto,RobotoDraft,Helvetica,Arial,sans-serif;font-size:13px">Florida Solar Design Group</span><br style="color:rgb(51,51,51);font-family:Roboto,RobotoDraft,Helvetica,Arial,sans-serif;font-size:13px"><br></div></div></div></div><br></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Fri, Dec 12, 2025 at 5:12 PM Jason Szumlanski <<a href="mailto:jason@floridasolardesigngroup.com">jason@floridasolardesigngroup.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div><div style="font-family:arial,helvetica,sans-serif">For you Wrenches using EG4:</div><div style="font-family:arial,helvetica,sans-serif"><br></div><div style="font-family:arial,helvetica,sans-serif">I'm contemplating a system design that would benefit tremendously if I could AC Couple PV to the GridBOSS on the backed up load port, but I don't see that documented as a method of AC Coupling. I know you can AC Couple up to 125A OCPD through a Smart Load port in the GridBOSS, but the AC Coupled PV in this scenario would be 400 feet away, and it could be connected to the backed up load center at that location (presumably via a feeder tap just on the line side of the load center with main breaker installed).</div><div style="font-family:arial,helvetica,sans-serif"></div><div style="font-family:arial,helvetica,sans-serif">I'm trying to avoid running a 125A circuit 400 feet back to the GridBOSS, and there are some code issues with doing that (multiple feeders between buildings being the biggest problem).</div><br clear="all"></div><div><div style="font-family:arial,helvetica,sans-serif">I did find a document that allows AC Coupled PV on the load port of the FlexBOSS in this scenario, but that does not help me. The FlexBoss connects to the GridBOSS through its Grid port, so it's a different scenario.</div><div style="font-family:arial,helvetica,sans-serif"><br></div><div style="font-family:arial,helvetica,sans-serif">I reached out to EG4 about this, but I was wondering if anyone here has some insight. </div><br></div><div><br></div><div><div style="font-family:arial,helvetica,sans-serif">Jason Szumlanski</div><div style="font-family:arial,helvetica,sans-serif">Florida Solar Design Group</div></div><div><div dir="ltr" class="gmail_signature"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><b><br></b></div></div></div></div></div></div></div></div></div>
</blockquote></div></div>