<div dir="ltr"><div>FWIW, I have some evault classics running in parallel with a hacked ReLion/Iron Edison battery (it had a BMS failure and the BMS was replaced with a JKBMS).   I have victron smarthshunts on each battery, connected to a cerbo, so I can track how all the different batteries are sharing.  So far, one of the evaults tracks along very well with the ReLion -- the Evault contributing a tad more current (it's a 360AH vs the 300A ReLion).  The other evault has something wrong (haven't gotten out to the site yet with the fortress tool to talk to its BMS, but it's acting like a bad cell perhaps -- only showing about half the capacity as the good one).  But the good one and the ReLion track very well with each other every day.  It's all open loop with some SolArk 12k inverters.  It gets up to 55.6 every day for a few minutes, then floats at 54.3 or so for the rest of the day.  Been operating like this for two months or so now.   So.... while I'm sure that it's not recommended practice, it does seem to work to parallel two different 16 cell batteries... </div><div><br></div><div>Zeke</div><div><br></div></div>