<div dir="auto"><div dir="auto">The manual seems to indicate diagrammatically that a Cat5 cable is required between the GridBoss and each FlexBoss inverter, but the text seems to indicate only a single Cat5 wire is required between the GridBoss and master FlexBoss. </div><div dir="auto"><br></div><div dir="auto">Can anyone confirm if a single Cat5 will work? </div><div dir="auto"><br></div><div dir="auto">I have a 100 foot run from the GridBoss to my inverters. I'm thinking about using a single Cat5 cable for comms and a CL3R cable for the RSD connection through the attic.</div><div dir="auto"><br></div><div dir="auto">Obviously, the included parallel cable should be used between the inverters. I get that part. </div><div dir="auto"><br></div><div>Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div><div><br></div><div data-smartmail="gmail_signature"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><b><div style="text-align:center"><table border="0" cellpadding="0" cellspacing="0" style="color:rgb(34,34,34);font-weight:400;text-align:start;font-family:"helvetica neue",helvetica,arial,sans-serif"><tbody><tr><td rowspan="2"><br></td><td rowspan="2"></td></tr></tbody></table></div></b></div></div></div></div></div></div></div></div>