<div dir="ltr"><div>Wow.  Reading through your document, I guess I've missed out on a lot of wire management issues by doing mostly ground mounts with my halfcut modules -- no MLPE, and just running the wires in the third rail. </div><div><br></div><div>I actually like the half cut modules a lot better for production in the winter because when I get snow covering just the bottom edge of an array, the top part still works at half amperage -- much better than the old 60 cell modules where I'd often have a few inches of snow hanging on the bottom cell line, blocking all three of the bypass sections.   Usually I find myself on the other end... where equipment is designed with everything except winter off grid systems.  Interesting that in this case, it's actually good for my situation, by chance.</div><div><br></div><div>Zeke</div><br></div>