<div dir="auto">It was my understanding that these compression lugs for DC connections are typically rated for fine stranded conductors. But I’m partial to ring terminals, so the pin adapter does sound like a good option as well. </div><div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Wed, Aug 27, 2025 at 3:00 PM Maverick Brown via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto"><span style="color:rgb(0,0,0);background-color:rgb(255,255,255)">For the six AWG and smaller I have a nice crimper that does a great job making hex shaped crimps.</span><div style="color:rgb(0,0,0)"><br></div><div style="color:rgb(0,0,0)">For the 2/0 and 4/0 cables, I just slide the ferrule onto the conductors, then insert the ferrule + conductors into the lug. And then tighten the set screw to the specified torque. As a test, I have removed the cable to see how the ferrule survived the set screw. The ferrule was not ripped and kept the wires inside. The wires fit the backside of the lug and were semicircular as proper and the set screw made a perfect spot for it to land onto the ferrule. I usually double check the torque at the end of doing the other wires to make sure the battery cables are secure. </div><div style="color:rgb(0,0,0)"><br></div><div style="color:rgb(0,0,0)">This method may not be scientific. I do have a battery cable crimper for regular lugs, but it make a diamond shaped crimp that doesn’t seem as nice as just using the set screw in the terminal. </div><br><div dir="ltr">Thank you,<div><br></div><div>Maverick</div><div><div id="m_-6233256159278914023AppleMailSignature" style="color:rgb(0,0,0);font-family:Helvetica;font-size:12px"><div><br></div><div>Maverick Brown<br>Off-Grid Solar Commander since 2006<br>Maverick Solar Enterprises, Inc.<br> • Solar Commander Remote Power<br> • SunFlow Systems Cathodic Protection <br><a href="mailto:maverick@mavericksolar.com" target="_blank">maverick@mavericksolar.com</a><br>512-460-9825</div><div><br></div></div></div><div><br></div></div><div dir="ltr"><br><blockquote type="cite">On Aug 27, 2025, at 9:41 AM, William Miller via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"></div></blockquote></div><div dir="auto"><blockquote type="cite"><div dir="ltr"><div dir="auto">Friends:</div><div dir="auto"><br></div><div dir="auto">More inverters these days present lugs for battery connections instead of studs. I bought some 2/0 and 4/0 ferrules to accommodate the fine stranded MTW we use. I have a cheap hex crimper but the results are poor with a sharp “wing” on either side of the crimp. </div><div dir="auto"><br></div><div dir="auto">What does the hive mind suggest for a ferrule and crimper for these larger wire sizes?</div><div dir="auto"><br></div><div dir="auto">Thanks in advance. <br clear="all"><br><div dir="auto"><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature">William Miller<br>Miller Solar.com<br>805-438-5600<br><a href="http://www.millersolar.com" target="_blank">www.millersolar.com</a><br></div></div></div>
<span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank">http://re-wrenches.org</a></span><br><span></span><br><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a></span><br><span></span><br><span>Change listserver email address & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a></span><br><span><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">http://www.re-wrenches.org/etiquette.htm</a></span><br><span></span><br><span>Check out or update participant bios:</span><br><span><a href="http://www.members.re-wrenches.org" target="_blank">http://www.members.re-wrenches.org</a></span><br><span></span><br></div></blockquote></div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>