<div dir="auto"><div>At my house(before I got hip to using bigger gutters) I furred out the wall with 2x4s and 1/2" plywood and used a 6" for my AIO...worked nicely.</div><div><br></div><div data-smartmail="gmail_signature"><br> </div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Fri, Jul 25, 2025, 3:43 PM Zeke Yewdall via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div class="gmail_quote"><div>I noticed this on a SolArk job -- I think I bought out all of NW montana of 1" offset nipples to get 3 of them mounted to an 8" gutter once.</div><div><br></div><div>On the Midnite AIO's a 10" gutter is perfect to not need any offsets. But you can mount smaller gutters on various levels of unistrut to space them off the wall. An 8" gutter on standard unistrut works fairly well, and I think you could space a 6" off with two or three levels of unistrut to get it to line up well. Of course then the gutter is too far from the wall to easily mount other equipment on top of it, and it can be harder to do rear entries into the gutter from the wall. That's where the 10" gutter is nicer, because it can catch the front of the inverter, as well as an AC panel or such mounted off to the side of the inverter, and catch pass throughs into the back of it. I'm not sure about the SolArk and Fortress, but I imagine they'd be pretty similar.</div><div><br></div><div>Zeke</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
Message: 1<br>
Date: Fri, 25 Jul 2025 15:19:29 -0700<br>
From: William Miller <<a href="mailto:william@millersolar.com" target="_blank" rel="noreferrer">william@millersolar.com</a>><br>
To: RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">re-wrenches@lists.re-wrenches.org</a>><br>
Subject: [RE-wrenches] Knockouts far from the backplane.<br>
Message-ID: <<a href="mailto:12d27fd24ffa361c26a5955f888d098e@mail.gmail.com" target="_blank" rel="noreferrer">12d27fd24ffa361c26a5955f888d098e@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Friends:<br>
<br>
<br>
<br>
I have noticed increasingly that inverters I have been using (Soul-Arc and<br>
Fortress Envy) have knockouts that are far in front of the backplane on<br>
which the inverter would be mounted. Connecting conduit from these<br>
inverters into standard gutters, load centers and pull boxes is quite a<br>
hassle: Offsets can eat up a lot of vertical space. Pulling elbows (LBs)<br>
don?t really work in this situation.<br>
<br>
<br>
<br>
See diagram below:<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
One solutIon is to stack pull boxes or gutters, althouigh this eats up<br>
vertical space and increases the labor and parts count:<br>
<br>
<br>
<br>
How are the rest of you handling this backplane problem?<br>
<br>
<br>
<br>
Thanks in advance.<br>
<br>
<br>
<br>
William Miller<br>
<br>
<br>
<br>
Miller Solar<br>
<br>
17395 Oak Road, Atascadero, CA 93422<br>
<br>
805-438-5600<br>
<br>
<a href="http://www.millersolar.com" rel="noreferrer noreferrer" target="_blank">www.millersolar.com</a><br>
<br>
CA Lic. 773985<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250725/5dd8985c/attachment.htm" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250725/5dd8985c/attachment.htm</a>><br>
-------------- next part --------------<br>
A non-text attachment was scrubbed...<br>
Name: image002.jpg<br>
Type: image/jpeg<br>
Size: 164770 bytes<br>
Desc: not available<br>
URL: <<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250725/5dd8985c/attachment.jpg" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250725/5dd8985c/attachment.jpg</a>><br>
-------------- next part --------------<br>
A non-text attachment was scrubbed...<br>
Name: image006.jpg<br>
Type: image/jpeg<br>
Size: 167762 bytes<br>
Desc: not available<br>
URL: <<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250725/5dd8985c/attachment-0001.jpg" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250725/5dd8985c/attachment-0001.jpg</a>><br>
<br>
------------------------------<br>
<br>
Subject: Digest Footer<br>
<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
<br>
<br>
------------------------------<br>
<br>
End of RE-wrenches Digest, Vol 18, Issue 283<br>
********************************************<br>
</blockquote></div><div><br clear="all"></div><br><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr">Zeke Yewdall<div>PV Engineer</div><div>NABCEP #031508-89</div><div><a href="mailto:zeke@darkforestsolar.com" target="_blank" rel="noreferrer">zeke@darkforestsolar.com</a></div><div>303-523-3592</div></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>