<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /></head><body style='font-size: 12pt; font-family: Verdana,Geneva,sans-serif'>
<p>Check the outlet with an ammeter and a hair dryer. You need a load! Make sure the current is correct and not a neutral issue of the inverter or wiring.</p>
<p>I have a hair dryer that I know the current on. I also use this in split phase to make sure the 2 legs add to the correct current. Test that there is not a parallel path or earthing issue. If there is you will get a lower than normal reading of current.</p>
<ol>
<li>On the circuit, place one probe of a voltmeter on the active conductor (load side of the RCD or circuit breaker).</li>
<li>Place the other probe on the main panel neutral bar. You should see your 120vac. This will show neutral continuity.</li>
</ol>
<p>Weird ones... Good Luck !</p>
<div id="signature">
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" rel="noopener"> </a><a style="color: blue; font-size: 11px; font-family: 'Lucida Grande', Verdana, Arial, Helvetica, sans-serif; font-weight: 400; background-color: #ffffff;" href="https://offgridsolar1.com/" rel="noopener noreferrer"><span style="font-size: 12pt;">https://offgridsolar1.com/</span></a><a href="http://members.sti.net/offgridsolar/" rel="noopener"> </a>
e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p><br /></p>
<p id="reply-intro">On 2025-06-23 11:58 am, David Palumbo via RE-wrenches wrote:</p>
<blockquote type="cite" style="padding: 0 0.4em; border-left: #1010ff 2px solid; margin: 0">
<style type="text/css">#replybody1 P { margin-top: 0; margin-bottom: 0; }</style>
<div id="replybody1" dir="ltr">
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">Wrenches,</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;"> </div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">I've got a new neighbor here living in an off-grid home with a system of mine. She has a 2017 Chevy Volt plug-in hybrid.</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">It draws 12A on high setting or 8 Amps at 120VAC.</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">It charges fine off my homes VFX 3524OutBack but on her homes FX 2524 OutBack the charger indicator at the male cord plug end immediately goes Red and won't charge at all. Manufacturers label at the indicator light says it could be a ground problem.</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">Both the outlet that does operate the charger fine and the one that gives the red signal are GFCI. The GFCI that works is over ten years old while the outlet that won't charge is new if that makes a difference. The new outlet that won't charge operates other loads just fine and I measure 121 VAC with my Fluke.</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;"> </div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">Thanks for your time,</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;"> </div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">Dave Palumbo</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">Retired</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;">Hyde Park, Vermont</div>
<div class="v1elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: #000000;"> </div>
</div>
<br />
<div class="pre" style="margin: 0; padding: 0; font-family: monospace">_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank" rel="noopener noreferrer">http://re-wrenches.org</a><br /><br />List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank" rel="noopener noreferrer">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">http://www.members.re-wrenches.org</a><br /><br /></div>
</blockquote>
</body></html>