<div dir="auto"><div>Subtitle: can you please burn my house down?</div><div dir="auto"><br></div><div dir="auto">I ran across a home with a complete mess of TC-ER Cable used for DC circuits operating at ~450V. I know you can't run TC-ER in conduit unless it has an EGC in the cable jacket, and you certainly can't suspend it from the ceiling like in the attached pictures, but it got me thinking...</div><div dir="auto"><br></div><div dir="auto">Would it be acceptable to use TC-ER between array sections where not subject to physical damage and where properly secured, supported, and terminated? I know the answers are going to come back as why not just use Type PV, or THWN in conduit, and do it "right," but I'm still curious. I have a feeling I'm going to find a whole lot more TC-ER on this island where a guy had free reign with no AHJ inspections. I found a neighbor with TC-ER running unprotected and improperly supported through an attic with a green THWN EGC following alongside. The TC-ER just pokes through the roof with some goop around it. I really don't want to touch these systems without correcting egregious fire safety issues. It's tough making that argument to people when their house hasn't burned down for the last X years since it was installed. </div><div dir="auto"><br></div><div dir="auto">P.S. Yes, in the lower right of one of these images, those are the battery cables running outdoors, completely unprotected from physical damage. Total hack job. </div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div><div data-smartmail="gmail_signature"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><b><div style="text-align:center"><table border="0" cellpadding="0" cellspacing="0" style="color:rgb(34,34,34);font-weight:400;text-align:start;font-family:"helvetica neue",helvetica,arial,sans-serif"><tbody></tbody></table></div></b></div></div></div></div></div></div></div></div>