<div dir="auto">Lou:</div><div dir="auto"><br></div><div dir="auto">I have worked hard to understand the Sunny Island. To me it is not that intuitive. </div><div dir="auto"><br></div><div dir="auto">As far as I know 231.05 tells the system simply if you have a generator or if you do not have a generator. <br clear="all"><br>One needs to consider the Backup mode setting on the Sunny Boy(s). Options are On All or Off. I have tried both and I can’t quantify any difference. If anyone knows please let me know. </div><div dir="auto"><br></div><div dir="auto">William Miller<br></div><div dir="auto"><div dir="auto"><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature">Miller Solar.com<br>805-438-5600<br><a href="http://www.millersolar.com">www.millersolar.com</a><br></div></div></div><div><br></div><div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Mon, May 26, 2025 at 9:33 PM Lou Russo via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;padding-left:1ex;border-left-color:rgb(204,204,204)"><div dir="ltr"><div>Aloha All,<br clear="all"></div><div><br></div><div>I am messing around with a system in our shop just 'cause I wanted to mess around with AC coupled systems at my leisure. 

This setup is completely off-grid. I have an autoformer between the SB and the SI.

</div><div><br></div><div>I am able to make changes to the parameters on the SB with an old Webbox and a RS485 Piggyback card. </div><div><br></div><div>The manuals I found online are showing a slightly different set of parameters than what I am seeing in real life. For instance, there is no "country standard" parameter on the SB. And when I make the recommended changes to the parameters that do match up with the manuals, the value ranges on the SB are much tighter so it does not let me enter negative numbers as the manuals are wanting me to set for frequency shifting to work well. I am not in the mood to torch the three Discover 7.4s attached to the SI6048. </div><div><br></div><div>Makes me think there is a firmware update but SMA's website returned nothing. It is currently running BFR 2.72 and SRR 2.72. The SB is from 2009.</div><div><br></div><div>Any thoughts on an old (but newer) firmware? Is it even possible to update the firmware on this dinosaur? </div><div><br></div><div>While I am at it, can any one explain the difference between "PvOnly" and "Gen" for setting 231.05 ExtSrc on the SI6048?  The manual is lacking reassuring details.</div><div><br></div><div>Thanks for entertaining my sadomasochism.  </div><div><br></div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div dir="ltr">Aloha,<div>Lou Russo </div><div>Spree Solar Systems LLC </div><div>C-34322</div><div><br></div></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>