<div dir="auto"><div>I don't have another recommendation for a 600v charge controller but I can tell you Midnite does make a standard, single space panelmount 125a breaker. Also keep in mind the PV input breaker would have to be 600v rated, also readily available from Midnite.. </div><div dir="auto"><br></div><div dir="auto">Tyrone Houck</div><div dir="auto">Oregon Solarworks LLC</div><div dir="auto">CCB #204937 LRT #076</div><div dir="auto">541-787-1366</div><div dir="auto"><a href="mailto:tyrone@oregonsolarworks.com">tyrone@oregonsolarworks.com</a></div><div><br></div><div data-smartmail="gmail_signature"><br>    </div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Apr 18, 2025, 5:36 AM Jason Szumlanski via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">Hi all, <div dir="auto"><br></div><div dir="auto">I have a client that wants to replace a PV array that is aging and hurricane damaged. It's a rather old array of unknown rating connected to a MX60 via a Flexware 500 DC enclosure (48V). </div><div dir="auto"><br></div><div dir="auto">I'm planning to install eight REC 450 Alpha Pure RX in series. I'm going to need a 600 volt charge controller. I'm considering a Midnite Hawk's Bay unless someone has a better idea. </div><div dir="auto"><br></div><div dir="auto">The customer sent me this crude image. I can see the two inverter breakers on the right. I am wondering what the two breakers on the left are. I'm thinking one of these is an 80 amp breaker for the output of the MX60. The other one is probably a PV input breaker of unknown rating. I would need to change these to accommodate the new charge controller. The Midnite Hawk's Bay 90 requires a 125A output breaker. Does anyone know if there is an Outback breaker of this physical size and 125A rating to plug into this DC FlexWare enclosure? For the PV input, I should be able to get whatever breaker is required for this single string of PV. </div><div dir="auto"><br></div><div dir="auto">I'm all ears if there is an easier way to go about this with approximately 3,600W of new PV.</div><div dir="auto"><br></div><div dir="auto">Thanks in advance!</div><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>