<div dir="ltr">Hello Wrenches,<div>    I just fired up a new off grid solar array with the FM100 arc fault version.  RIght off I got the</div><div>arc fault/ground fault red light. It was the end of day with 145 V from the array but no current.   Question is, if I want to disable the function, will simply not passing wires through the current transducer effectively defeat the fault. or does the circuit board have to be pulled as well.  I have a new FM100 that I bought on Ebay that I just hooked up to my home system.  It is dark so I won't know until tomorrow if it is good but at least no red light and I simply did not pass wires through the ring. If it works tomorrow, is this a reasonable way to leave it wired up. Solar array in both cases are pole mounts. I pulled the arc fault circuit board on the customer's system but still a fault light.</div><div><br></div><div>John Blittersdorf </div></div>