<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body style="overflow-wrap: break-word; -webkit-nbsp-mode: space; line-break: after-white-space;">I just got an email back from them saying the following.<div><br></div><div><br><div>There is no solid bond but the following will allow voltage to be detected between neutral and ground.</div><div><ul><li>Internal EMI filters or transient suppression devices that connect the AC lines to the ground.</li><li>A small leakage path to ground via these components, which can result in measurable voltage.</li></ul><div>Is this common with other brands such as sol ark or midnite?</div><div><br></div><div>thanks</div><div><br></div><div>jay</div><div><div dir="ltr" class="gmail_signature"></div></div><br class="Apple-interchange-newline"><div><br><blockquote type="cite"><div>On Dec 10, 2024, at 2:38 PM, jay <jay.peltz@gmail.com> wrote:</div><br class="Apple-interchange-newline"><div><div>Hi All<br><br>I just got off the phone with EG4 with the following situation and I wonder if anyone has see this or can comment.<br><br>With no wires attached, inverter ( LUX 6000XP) I read 120v from L1 to ground and of course 120v to N. Yes it has an internal ground bond option which is turned off. <br><br>EG4 says this is normal go ahead and wire it up and that it’s fine that the main panel some 15’ away is where that bonding is officially happening. As I was worried that I was going to have 2 ground/neutral bonds. <br><br>I’ve not seen this with our legacy inverters, could this be some kind of a non solid connection??<br><br>I wonder if this is common with these types of inverters?<br><br>thanks in advance.<br><br>jay</div></div></blockquote></div><br></div></div></body></html>