<div dir="ltr">Hi Group,<div><br></div><div>We have an install with four Fronius Symo 10.0-3 inverters connected to a 208V WYE building hundreds of feet away.  While the building has a neutral, I would like to avoid sending the neutral out to the inverters as it is a waste of materials. More wire, bigger conduit, neutral kits in disconnects, etc.</div><div><br></div><div>The Symo manual indicates that there is a wye grid configuration with three phase and a neutral. And there is a delta configuration with three phase only. Both appear as though they can be set to 208V</div><div><br></div><div><img src="cid:ii_m34k91570" alt="image.png" width="542" height="317"><br></div><div><br></div><div><br></div><div>I can't see any reason why I can't program the inverters at Delta and not have a neutral. Am I missing anything? I tried inquiring with Fronius, but it's a process and the conduit has to go into the ground today.</div><div><br></div><div>Thanks wrenches!</div><div><br></div><div><br></div><div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>-James Jefferson Jarvis<br>APRS World, LLC<br>+1-507-454-2727<br></div><a href="http://www.aprsworld.com/" target="_blank">http://www.aprsworld.com/</a><br></div></div></div></div></div>