<div dir="ltr" gmail_original="1" processed="true"><div class="gmail_default" style="font-family: arial, helvetica, sans-serif;" processed="true">It's expensive, but I second Jerry's recommendation. With three subarrays, you should look at the Sol-Ark 15K with three MPPTs. The wiring is so clean with this inverter in most circumstances, even on a retrofit. I am getting more and more comfortable with EG4 LL batteries, mostly out of necessity as consumers learn how cheap they are. But HomeGrid is also a great pairing, and I'm sure others like Fortress, which I have not tried. </div><div class="gmail_default" style="font-family: arial, helvetica, sans-serif;" processed="true"><br></div><div class="gmail_default" style="font-family: arial, helvetica, sans-serif;" processed="true">If you do go the route of paralleling batteries and you don't have a stackable battery system or EG4's cabinet with integrated bus bars, I have found the Victron Lynx to be very handy up to 1000A. Over that, the Midnite 2000A combiner box is big, but flexible and well designed.</div><div class="gmail_default" style="font-family: arial, helvetica, sans-serif;" processed="true"><br></div><div class="gmail_default" style="font-family: arial, helvetica, sans-serif;" processed="true">I have resisted converting Outback systems to LiFePO due to the reported problems mentioned by others. But <span zeum4c4="1726598047318" data-ddnwab="1726598047318" class="ng" data-wpkgv="true">in</span> my <span zeum4c4="PR_8_0" data-ddnwab="PR_8_0" aria-invalid="grammar" class="Lm ng">situations</span>, most are buying a BIG battery and the inverter replacement cost becomes a smaller percentage of the project cost.</div><div processed="true"><div dir="ltr" class="gmail_signature" processed="true"><div dir="ltr" processed="true"><br>Jason Szumlanski<div processed="true"><span style="color: rgb(51, 51, 51); font-family: Roboto, RobotoDraft, Helvetica, Arial, sans-serif; font-size: 13px;">Principal Solar Designer | Florida Solar Design Group</span><br style="color: rgb(51, 51, 51); font-family: Roboto, RobotoDraft, Helvetica, Arial, sans-serif; font-size: 13px;"><span style="color: rgb(51, 51, 51); font-family: Roboto, RobotoDraft, Helvetica, Arial, sans-serif; font-size: 13px;">NABCEP Certified Solar Professional (PVIP)</span><br style="color: rgb(51, 51, 51); font-family: Roboto, RobotoDraft, Helvetica, Arial, sans-serif; font-size: 13px;"><span style="color: rgb(51, 51, 51); font-family: Roboto, RobotoDraft, Helvetica, Arial, sans-serif; font-size: 13px;">Florida State Certified Solar Contractor CVC56956</span></div><div processed="true"><font color="#333333" face="Roboto, RobotoDraft, Helvetica, Arial, sans-serif">Florida Certified Electrical Contractor EC13013208</font></div></div></div></div><br></div><br><div class="gmail_quote" processed="true"><div dir="ltr" class="gmail_attr" processed="true">On Tue, Sep 17, 2024 at 1:59 PM Jerry Shafer via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:<br></div><blockquote class="gmail_quote" style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"><div dir="auto" processed="true">Dave, <div dir="auto" processed="true">I would suggest stepping up to 48 nominal, fortress 18.5, battery 12 or 15 k solark inverter, re-wire the array to single or dual string, make the wiring in the home capable of 240, this usually requires main panel re-work and set up the monitoring. </div><div dir="auto" processed="true">Batteries are like replacement heart valves, never get startups or small manufacturers as so many disappear and now you are stuck.</div><div dir="auto" processed="true">Fun times.</div></div><br><div class="gmail_quote" processed="true"><div dir="ltr" class="gmail_attr" processed="true">On Tue, Sep 17, 2024, 8:19 AM David Palumbo via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-<wbr>wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin: 0px 0px 0px 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">




<div dir="ltr" processed="true">
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
Wrenches,</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
I have a nice little rental house here in my off-grid neighborhood that after 40 years is ready to transition to LiFePO4 batteries. </div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
I have no experience with any lithium home power storage batteries. I'm looking for advice, so I can avoid mistakes as a rental house with battery problems is quite the pain in the ass. The last tenant was my daughter so life with older lead acids wasn't a
 huge issue, but now I want something I won't have to enter the house to monitor and operate. I'll bullet what I think I know and my questions.</div>
<ul style="list-style-type: disc;">
<li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">The house has four 11-year-old Trojan Industrial IND 17-6 for 925 AH @ 24V that are amply sized for the houses loads.</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">It has a newer TriMetric meter that I was supposed to be able to set up for web access using their WIFI module, but I have had no success with being able to monitor battery state of charge remotely.</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">I really need something that will give me battery state of charge information without entering the house.</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">The system has a single OutBack VFX3624. PV array is 2.5kW. </div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">System also has a Iota 40A charger so charging with my 6 KW genset is typically in the 100Amp range with the OutBack and Iota.</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">We are in northern Vermont, so we rack up significant generator (NOT auto-start) run time in the winter months. </div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true"> I'm looking at Eclipse LiFePO4 24V 200AH. Three of these will give me 600AH @ 24V which is 65% of the rated Amp Hrs of the Trojan Industrials now in use. Is this enough?</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">My battery box can easily handle up to four of the Eclipse 24V 200AH batteries. I see that Backwoods recommends that only three of the Eclipse are connected with battery cables. If I opted for four (for 800AH) I would need to use
 a busbar.</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">Are there other distributors of Eclipse batteries other than Backwoods Solar that I should consider? I haven't used my dealer account with them for a number of years and I'm not sure that I'll get a good price from them.</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">What is the lead time for getting these batteries shipped out?</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">Are there other LiFePO4 batteries I should consider?</div>
</li><li style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<div processed="true">Is 600AH of LiFePO4's enough to replace 925AH of LA's?</div>
</li></ul>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
Dave Palumbo</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
Retired from running Independent Power, but active in off-grid solar.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
Hyde Park, VT</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" processed="true">
802-371-8678 voice or text.</div>
</div>

______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715711" style="color: red;"></span>http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715712" style="color: red;"></span>http://lists.re-wrenches.org/<wbr>options.cgi/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715712" style="color: red;"></span>https://www.mail-archive.com/<wbr>re-wrenches@lists.re-wrenches.<wbr>org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715713" style="color: red;"></span>http://lists.re-wrenches.org/<wbr>pipermail/re-wrenches-re-<wbr>wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715714" style="color: red;"></span>http://www.re-wrenches.org/<wbr>etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715714" style="color: red;"></span>http://www.members.re-<wbr>wrenches.org</a><br>
<br>
</blockquote></div>
______________________________<wbr>_________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715715" style="color: red;"></span>http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.<wbr>org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715715" style="color: red;"></span>http://lists.re-wrenches.org/o<wbr>ptions.cgi/re-wrenches-re-wren<wbr>ches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715716" style="color: red;"></span>https://www.mail-archive.com/r<wbr>e-wrenches@lists.re-wrenches.o<wbr>rg/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715717" style="color: red;"></span>http://lists.re-wrenches.org/p<wbr>ipermail/re-wrenches-re-wrench<wbr>es.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715718" style="color: red;"></span>http://www.re-wrenches.org/eti<wbr>quette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank"><span id="mt-tracked-link_0_1726597715719" style="color: red;"></span>http://www.members.re-wrenches<wbr>.org</a><br>
<br>
</blockquote></div>