<div dir="ltr">Aloha All,<div><br></div><div>I have a project that requires powering 6 different pieces of equipment (mostly small motors) from East Japan that require 200V 3 phase (L-L-L) at 50Hz (though 60Hz appears to be OK), a unique electrical scheme for sure. The amp requirement for the various pieces of equipment ranges from 0.75A to 6A. For a total maximum load of 28 amps. The site is off-grid with standard 120/240V North American Electrical Scheme using a Sol-Ark 15kW. </div><div><br></div><div>My initial plan was to use Digital Phase Converters from MYUNG YOUN ELECTRONICS for each device but after seeing the wiring in the control panel and power distribution box in person there is no room to do this. Plus the entire panel would need to be rewired. </div><div><br></div><div>Ideally, I would have one device that converts the electricity appropriately (transformer, VFD, etc). I have reached out to several EEs and am awaiting responses. </div><div><br></div><div>In the meantime I figured the hive mind of the Wrenches group may have some ideas or know somebody that would.</div><div><br></div><div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div>As always, thanks for everyone's time. </div><div><br></div><div>Aloha,<div><br></div><div>Lou Russo </div><div>Owner</div><div><a href="mailto:lou@spreesolarsystems.com" target="_blank">lou@spreesolarsystems.com</a></div><div>Office - 808 345 6762</div><div>Direct Line - 808 731 1907</div><div>Spree Solar Systems LLC </div><div>CT-34322</div><div><br></div></div></div></div></div></div></div></div></div>