<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p><font size="4">Ok, this sounds like what I have, so probably
that's not going to change and just have to live with it. <br>
</font></p>
<p><font size="4">All said and done, I've installed maybe 20
Outbacks out here, and very very few issues over many years. <br>
</font></p>
<p><font size="4"><br>
</font></p>
<p><font size="4"><br>
</font></p>
<div class="moz-cite-prefix">On 7/19/2024 12:59 PM, Chris Schaefer
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAFOvL0ZfcYRD7O63J7eH8X+DEHQKx_PkEYpMn+YYhuK4fXkZTA@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">Not sure if this helps but I had installed a full
blown Outback twin VFX 3648 with two MX60's with the old green
cabinets back in 2005. Last year I had to replace the two
inverters with the new FXR as the VFX is discontinued. In order
to do this I had to dump the old oval mate and move up to the
Mate3s, as well as replace the old Hub 10.1 and use the newer
10.3. When all said and done, the Mate saw the old MX60's but
you were unable to make changes or access any data/settings. One
other note, the 2nd inverter goes on port 7 of the Hub, not port
2 as we've been use to in the past.
<div><br>
</div>
<div>Christopher</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Fri, Jul 19, 2024 at
12:30 PM jay via RE-wrenches <<a
href="mailto:re-wrenches@lists.re-wrenches.org"
moz-do-not-send="true" class="moz-txt-link-freetext">re-wrenches@lists.re-wrenches.org</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote"
style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div style="overflow-wrap: break-word;">HI Chris,
<div><br>
</div>
<div>Can you give us more data?</div>
<div><br>
</div>
<div>Like is this a new problem, or it only started after X?</div>
<div><br>
</div>
<div>Since its not seeing the port ( NA) it could be the CC
or the HUB, or the cable. </div>
<div>the hub will show an active LED light if its connecting
to anything on that port. </div>
<div><br>
</div>
<div>You can try plugging into the CC directly to see if it
reads it, probably easier with another mate. </div>
<div><br>
</div>
<div>It just sucks to not have tech support or anyone on
wrenches from some OEMS</div>
<div><br>
</div>
<div>Jay</div>
<div><br>
</div>
<div><br>
<div><br>
<blockquote type="cite">
<div>On Jul 19, 2024, at 10:13 AM, Christopher Warfel
via RE-wrenches <<a
href="mailto:re-wrenches@lists.re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">re-wrenches@lists.re-wrenches.org</a>>
wrote:</div>
<br>
<div>
<div>
<p>This is grid tied system with all firmware
updates that the Mate 3s recognizes. I cannot
figure this blank data menu out. I have to
program the battery ABS, FLOAT settings from the
FM60 CC. System is 12 years old so no Tech
support available even if they answer the
phone....</p>
<p>Has anyone have advice for if this is normal,
or if there seems to be an issue? Used a spare
Mate 3s with no difference. Thank you, Chris<br>
</p>
<p><br>
</p>
<p><br>
</p>
<div><span style="white-space:pre-wrap">
</span><br>
</div>
<div>-- <br>
<font size="5" face="AngsanaUPC"> <font> </font></font><font
size="5" face="Times New Roman"> </font><font
face="Times New Roman"><font size="5">
Christopher Warfel</font><br>
ENTECH Engineering Inc.<br>
PO Box 871, Block Island, RI 02807<br>
401-477-5773</font><br>
<font face="Adobe Arabic"><font size="5"><a
href="https://entech-engineering.com/Home/default.php" target="_blank"
moz-do-not-send="true"><span
id="m_6801397130839101695cid:part1.FUGIGgKJ.DEHmcGZQ@entech-engineering.com"><EEIlogolong.jpg></span></a><br>
</font><br>
</font> </div>
</div>
<span
id="m_6801397130839101695cid:82BEE01B-ECE5-4A8A-ABDB-D3538788F273"><Mate3s
Battery Setpoint Menu.jpg></span><span
id="m_6801397130839101695cid:481B7676-1FF1-4D74-B3E7-EE4984677EB6"><cwarfel.vcf></span>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a
href="http://re-wrenches.org" target="_blank"
moz-do-not-send="true"
class="moz-txt-link-freetext">http://re-wrenches.org</a><br>
<br>
List Address: <a
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one
doesn't work, try the other:<br>
<a
href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.members.re-wrenches.org</a><br>
<br>
</div>
</blockquote>
</div>
<br>
</div>
</div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a
href="http://re-wrenches.org" rel="noreferrer"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://re-wrenches.org</a><br>
<br>
List Address: <a
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't
work, try the other:<br>
<a
href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
<span class="gmail_signature_prefix">-- </span><br>
<div dir="ltr" class="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<p style="text-align:center"><span
style="font-size:10pt;color:rgb(31,73,125)"><font
face="Arial, sans-serif">Chris Schaefer’s<br>
</font></span><img
src="https://ci3.googleusercontent.com/mail-sig/AIorK4xwQObc1lE4m-NGBGV2ONhmIo5vEAZs2lO5NoIACbJsI4fJ_a1hsiFC2biIJSxI90VJ_atMDSuJtjW-"
moz-do-not-send="true"><br>
<i><span
style="font-family:Arial,sans-serif;color:rgb(31,73,125)"><span
style="font-size:9pt">Tel 585-229-2083 or Cell
585-748-1870 </span><span
style="font-size:12px"><br>
</span></span></i><i style="font-size:12.8px"><span
style="font-size:10pt"><font color="#1f497d"><font
face="Arial, sans-serif">5115
S Hill Road ~ Canandaigua New York 14424<br>
</font></font></span></i><i
style="font-size:12.8px"><span
style="font-size:10pt;font-family:Arial,"sans-serif";color:rgb(31,73,125)"><a
href="http://www.solarandwindfx.com"
target="_blank" moz-do-not-send="true"><span
style="color:blue">www.solarandwindfx.com</span></a>
~ E-mail: <span style="color:blue"><a
href="mailto:chris@solarandwindfx.com"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">chris@solarandwindfx.com</a></span></span></i></p>
<p style="text-align:center"><i><span
style="font-size:10pt;font-family:Arial,"sans-serif";color:rgb(31,73,125)"><img
src="https://ci3.googleusercontent.com/mail-sig/AIorK4ytw2s5T2YLi-11AL2Jyo5Jt6UbbDYElzDl4X0PqflWvs06VON--dPV7x_cgeW3zkEV-fkQc7IhsiwV"
moz-do-not-send="true"><br>
</span></i></p>
<p style="text-align:center"><span
style="font-size:10pt;font-family:Arial,"sans-serif";color:black">Thomas
Jefferson,
the author of our great Constitution, once said,
"democracy" will
cease to exist when you take away from those who
are willing to work and give
to those who would not."</span><span
style="font-size:10pt;font-family:Arial,"sans-serif";color:rgb(31,73,125)"></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
<div class="moz-signature">-- <br>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<title></title>
<font size="5" face="AngsanaUPC"> <font color="#000000"> </font></font><font
size="5" face="Times New Roman" color="#000000"> </font><font
face="Times New Roman" color="#000000"><font size="5">
Christopher Warfel</font><br>
ENTECH Engineering Inc.<br>
PO Box 871, Block Island, RI 02807<br>
401-477-5773</font><br>
<font face="Adobe Arabic"><font size="5"><a
href="https://entech-engineering.com/Home/default.php"><img
moz-do-not-send="false"
src="cid:part1.g7sxbnF0.fViTRZUX@entech-engineering.com"
alt="EE Logo" width="274" height="121" border="0"></a><br>
</font><br>
</font> </div>
</body>
</html>