<div dir="ltr">Not sure if this helps but I had installed a full blown Outback twin VFX 3648 with two MX60's with the old green cabinets back in 2005. Last year I had to replace the two inverters with the new FXR as the VFX is discontinued. In order to do this I had to dump the old oval mate and move up to the Mate3s, as well as replace the old Hub 10.1 and use the newer 10.3. When all said and done, the Mate saw the old MX60's but you were unable to make changes or access any data/settings. One other note, the 2nd inverter goes on port 7 of the Hub, not port 2 as we've been use to in the past.<div><br></div><div>Christopher</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Jul 19, 2024 at 12:30 PM jay via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="overflow-wrap: break-word;">HI Chris,<div><br></div><div>Can you give us more data?</div><div><br></div><div>Like is this a new problem, or it only started after X?</div><div><br></div><div>Since its not seeing the port ( NA) it could be the CC or the HUB, or the cable. </div><div>the hub will show an active LED light if its connecting to anything on that port. </div><div><br></div><div>You can try plugging into the CC directly to see if it reads it, probably easier with another mate. </div><div><br></div><div>It just sucks to not have tech support or anyone on wrenches from some OEMS</div><div><br></div><div>Jay</div><div><br></div><div><br><div><br><blockquote type="cite"><div>On Jul 19, 2024, at 10:13 AM, Christopher Warfel via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:</div><br><div>
<div><p>This is grid tied system with all firmware updates that the Mate
3s recognizes. I cannot figure this blank data menu out. I have
to program the battery ABS, FLOAT settings from the FM60 CC.
System is 12 years old so no Tech support available even if they
answer the phone....</p><p>Has anyone have advice for if this is normal, or if there seems
to be an issue? Used a spare Mate 3s with no difference. Thank
you, Chris<br>
</p><p><br>
</p><p><br>
</p><div><span style="white-space:pre-wrap">
</span><br></div>
<div>-- <br>
<font size="5" face="AngsanaUPC"> <font> </font></font><font size="5" face="Times New Roman"> </font><font face="Times New Roman"><font size="5">
Christopher Warfel</font><br>
ENTECH Engineering Inc.<br>
PO Box 871, Block Island, RI 02807<br>
401-477-5773</font><br>
<font face="Adobe Arabic"><font size="5"><a href="https://entech-engineering.com/Home/default.php" target="_blank"><span id="m_6801397130839101695cid:part1.FUGIGgKJ.DEHmcGZQ@entech-engineering.com"><EEIlogolong.jpg></span></a><br>
</font><br>
</font> </div>
</div>
<span id="m_6801397130839101695cid:82BEE01B-ECE5-4A8A-ABDB-D3538788F273"><Mate3s Battery Setpoint Menu.jpg></span><span id="m_6801397130839101695cid:481B7676-1FF1-4D74-B3E7-EE4984677EB6"><cwarfel.vcf></span>_______________________________________________<br>List sponsored by Redwood Alliance<br><br>Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank">http://re-wrenches.org</a><br><br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br><br>Change listserver email address & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>There are two list archives for searching. When one doesn't work, try the other:<br><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br><br>Check out or update participant bios:<br><a href="http://www.members.re-wrenches.org" target="_blank">http://www.members.re-wrenches.org</a><br><br></div></blockquote></div><br></div></div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><p style="text-align:center"><span style="font-size:10pt;color:rgb(31,73,125)"><font face="Arial, sans-serif">Chris Schaefer’s<br></font></span><img src="https://ci3.googleusercontent.com/mail-sig/AIorK4xwQObc1lE4m-NGBGV2ONhmIo5vEAZs2lO5NoIACbJsI4fJ_a1hsiFC2biIJSxI90VJ_atMDSuJtjW-"><br><i><span style="font-family:Arial,sans-serif;color:rgb(31,73,125)"><span style="font-size:9pt">Tel 585-229-2083 or Cell 585-748-1870 </span><span style="font-size:12px"><br></span></span></i><i style="font-size:12.8px"><span style="font-size:10pt"><font color="#1f497d"><font face="Arial, sans-serif">5115
S Hill Road ~ Canandaigua New York 14424<br></font></font></span></i><i style="font-size:12.8px"><span style="font-size:10pt;font-family:Arial,"sans-serif";color:rgb(31,73,125)"><a href="http://www.solarandwindfx.com" target="_blank"><span style="color:blue">www.solarandwindfx.com</span></a> ~ E-mail: <span style="color:blue"><a href="mailto:chris@solarandwindfx.com" target="_blank">chris@solarandwindfx.com</a></span></span></i></p><p style="text-align:center"><i><span style="font-size:10pt;font-family:Arial,"sans-serif";color:rgb(31,73,125)"><img src="https://ci3.googleusercontent.com/mail-sig/AIorK4ytw2s5T2YLi-11AL2Jyo5Jt6UbbDYElzDl4X0PqflWvs06VON--dPV7x_cgeW3zkEV-fkQc7IhsiwV"><br></span></i></p>
<p style="text-align:center"><span style="font-size:10pt;font-family:Arial,"sans-serif";color:black">Thomas Jefferson,
the author of our great Constitution, once said, "democracy" will
cease to exist when you take away from those who are willing to work and give
to those who would not."</span><span style="font-size:10pt;font-family:Arial,"sans-serif";color:rgb(31,73,125)"></span></p></div></div></div></div></div></div>