<div dir="ltr">Mac, the only other device is currently a Resol Vbus monitor and it's been fine with the bad DSL for years and has had no trouble with Starlink. He plans to add security cameras now that we have Starlink there. For now I'll point one at the Mate3S so at least we can see system status! The Starlink system is the new Gen3, and their new wifi router is much improved over my gen 2.<div><br></div><div>I did notice on one service call last fall is that after rebooting the Mate 3s, I also had to reboot the unmanaged (dumb) and somewhat old LAN switch. I'm going down there Sunday to replace it with a
<a class="gmail-a-link-normal" href="https://www.amazon.com/gp/product/B08QTXNWZ1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1" style="box-sizing:border-box;color:rgb(199,81,31);outline:0px;font-family:"Amazon Ember",Arial,sans-serif;font-size:13px">TP-Link ER605 V2 Wired Gigabit</a> router, I'll be down there for a couple days (might as well watch the eclipse from an awesome spot) so we'll have a couple days to see if it works better with Starlink as the primary WAN and fail back to the DSL, or the other way around.</div><div><br></div><div>The Mate's own auto-reboot doesn't seem to have been helping us over the last 5 years but I'll leave it on.<br><div><br></div><div>Best regards,<br><div><br clear="all"><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div style="margin:0px;padding:0px;border:0px;font-stretch:inherit;font-size:12pt;line-height:inherit;font-family:Calibri,Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(0,0,0)"><span style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)">Dan Fink</span></div><div style="margin:0px;padding:0px;border:0px;font-stretch:inherit;font-size:12pt;line-height:inherit;font-family:Calibri,Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(0,0,0)"><div style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)"><span style="font-size:12.8px">Owner, Buckville Energy Consulting LLC</span></div><div style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)"><span style="font-size:12.8px">IREC Certified Instructor for PV and Small Wind Installation</span></div><div style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)"><span style="font-size:12.8px">NABCEP Certified PV System Inspector</span></div><div style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)">NABCEP PV Associate</div><div style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)"><a href="mailto:dan.fink@greendustrialtraining.com" target="_blank">d</a><a href="mailto:anbob88@gmail.com" target="_blank">anbob88@gmail.com</a></div><div style="margin:0px;padding:0px;border:0px;font-style:inherit;font-variant:inherit;font-weight:inherit;font-stretch:inherit;font-size:12.8px;line-height:inherit;font-family:Arial,Helvetica,sans-serif,serif,EmojiFont;vertical-align:baseline;color:rgb(34,34,34)">970-672-4342</div></div><br> </div></div></div></div></div></div></div></div></div></div></div><br></div></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Apr 5, 2024 at 2:50 PM Mac Lewis via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Hi Dan,<div><br></div><div>We've had very good luck with the Starlink/Mate3s combo with the latest firmware. Do other devices drop too? </div><div><br></div><div>I think the updated router will fix this. You can also use that reboot schedule. I am curious, what router are you using for dual WAN? </div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Apr 5, 2024 at 1:23 PM William Miller via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div lang="EN-US"><div><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)">Dan:</span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)">There was a period of time when the Mate3 or 3s would lock up pretty regularly. We built a system that could disconnect the Mate from the hub via a din rail mount RJ-45 relay. This <a href="https://millersolar.com/MillerSolar/Portfolio/Commercial/Cal_Trans/Remote/Remote_Control.html" target="_blank">link</a> may provide some more info. If you want more details let me know.</span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)">William</span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">Miller Solar</span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">17395 Oak Road, Atascadero, CA 93422</span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">805-438-5600</span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)"><a href="http://www.millersolar.com/" target="_blank"><span style="color:blue">www.millersolar.com</span></a></span></p><p class="MsoNormal"><span style="font-family:Arial,"sans-serif";color:rgb(31,73,125)">CA Lic. 773985</span></p><p class="MsoNormal"><span style="font-size:11pt;font-family:Calibri,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><span style="font-family:Verdana,"sans-serif";color:rgb(31,73,125)"> </span></p><p class="MsoNormal"><b><span style="font-size:10pt;font-family:Tahoma,"sans-serif"">From:</span></b><span style="font-size:10pt;font-family:Tahoma,"sans-serif""> RE-wrenches [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>] <b>On Behalf Of </b>Dan Fink via RE-wrenches<br><b>Sent:</b> Friday, April 5, 2024 12:07 PM<br><b>To:</b> RE-wrenches<br><b>Cc:</b> Dan Fink<br><b>Subject:</b> [RE-wrenches] Outback Optics RE and Starlink</span></p><p class="MsoNormal"> </p><div><p class="MsoNormal">Esteemed Wrenches - One of my Optics sites started acting up last summer, randomly dropping its connection, and requiring a manual Mate reboot (unplug Mate connection to Hub, wait 30 seconds and replug - but a 4-hour drive), after which the Mate3S would be back online in under a minute. It was set to reboot every 24 hours as per advice from Outback years ago, and it all worked fine for years.</p><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">We upgraded the Mate3S firmware last fall, and turned the Mate auto-reboot off, no help. Rebooted manually again, set auto reboot to 24 hours again, then to 4 hours. No help.</p><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">The site is rural and offgrid, but has Centurylink DSL that has been getting slower with more dropouts every month, and everyone in town is complaining about it.</p><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">So we installed Starlink for the client, the wired router is right next to the Mate. . It's blazing fast, but we are having the same issue of random disconnects, requiring manual reboot . The little tab on the Mate3S RJ-45 cable is wearing out...</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">Outback says "This is a known issue with Starlink customers and has engineers for both our companies working on a joint solution on how to remedy this connectivity issue."</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">I'm going to install a load-balancing failback router this weekend, so hopefully during the times the Starlink gets too wonky, hopefully it fails back to the DSL and the Mate stays connected...</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">Has anyone else here dealt with Optics RE and Starlink? Any tips or tricks?</p></div><div><p class="MsoNormal"> I have monitoring systems in the field running on Starlink from Magnum, Midnite, and Schnieder, and none of them had any trouble with the Starlink internet connection. Odd that only Outback is causing problems.</p></div><div><p class="MsoNormal"> </p></div><div><p class="MsoNormal">I appreciate any and all advice!</p></div><div><p class="MsoNormal"> </p><div><div><div><div><div><div><div><div><div><div><div><div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34);border:1pt none windowtext;padding:0in">Dan Fink</span><span style="font-family:Calibri,"sans-serif";color:black"></span></p></div><div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34)">Owner, Buckville Energy Consulting LLC</span></p></div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34)">IREC Certified Instructor for PV and Small Wind Installation</span></p></div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34)">NABCEP Certified PV System Inspector</span></p></div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34)">NABCEP PV Associate</span></p></div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34)"><a href="mailto:dan.fink@greendustrialtraining.com" target="_blank">d</a><a href="mailto:anbob88@gmail.com" target="_blank">anbob88@gmail.com</a></span></p></div><div><p class="MsoNormal" style="vertical-align:baseline"><span style="font-size:9.5pt;font-family:Arial,"sans-serif";color:rgb(34,34,34)">970-672-4342</span></p></div></div><p class="MsoNormal"><br> </p></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</div></blockquote></div><br clear="all"><div><br></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div><br></div><div><font color="#305A78" face="'times new roman', serif"><br></font></div><div><br></div>Mac Lewis<br><br><span style="font-family:"Times New Roman";font-size:medium;color:rgb(255,153,0)"><b><font face="Arial, Helvetica, sans-serif" size="3"><p align="left"><font color="#000000" face="Verdana, Arial, Helvetica, sans-serif"><span style="font-size:small"><span style="font-family:arial;font-weight:normal;color:rgb(48,90,120)"><font face="'times new roman', serif">"Yo solo sé que no sé nada." </font><span style="font-weight:700;color:rgb(104,104,104)"><font face="'times new roman', serif">-Sócrates</font></span></span></span></font></p></font></b></span></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>