<div dir="ltr">The charge parameters depends on the FNDC settings, so yes, it comes from the FNDC but is triggered by the combination of the Mate or Mate3, again depending on the FNDC Settings: There are three "And/Or" Statements. So, to meet charge parameters, you must satisfy the following.<br><br>Statement 1<br>End Amps<div>And<br>Para Met Voltage <br>And</div><div>Para Met Time <br><br>If these are met, and there is a 60-second discharge, the Mate shows that the parameters were met and resets the SOC to 100% 60 seconds in the past... <br><br>BCF% <br><br>If set to, say, 95%, When you remove 100 amps and charge back 105 Amps. If this is met, and there is a 60-second discharge, the Mate shows that the parameters were met and resets the SOC to 100% 60 seconds in the past... </div><div><br></div><div>Absorb Timer Met<br><br>If the charge controllers or inverter meet the absorb timers as programmed, and there is a 60-second discharge, the Mate shows that the parameters were met and resets the SOC to 100% 60 seconds in the past... <div><br></div>I don't know why it displays a flashing LED. That is beyond my knowledge; I have never seen this, but it might be related to its setup or operation mode. <br><br>As for Lones, he retired (6 Months <a class="gmail_plusreply" id="plusReplyChip-1">+)</a> quite some time ago. I don't know who is now in charge of the wrenches list at Outback. With the recent Outback developments, I'd be surprised if they have a tech even looking at these emails. <br><br clear="all"><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div style="float:left;padding:1px 10px 0 0"><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"></a><a href="http://www.rollsbattery.com" target="_blank"><img src="https://i.imgur.com/YIluKhq.png" alt="" style="padding:3px 0px 0px 10px;float:left;margin-right:10px;width:98px;height:115px"></a><div style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:14px;line-height:20px;font-family:Arial,Helvetica,sans-serif;margin:0px"><font color="#bb1a1d">Steve Higgins ⋅
</font><span style="color:rgb(64,64,64);font-size:12px">Technical Services Manager</span>
</div>
<div style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:12px;line-height:20px;font-family:Arial,Helvetica,sans-serif;margin:0px"><font color="#bb1a1d">
t</font><span style="color:rgb(184,39,106)">
<span style="font-weight:normal;color:#404040">+1.902.597.4020</span> </span><font color="#bb1a1d">m</font>
<span style="color:rgb(64,64,64);font-weight:normal">+1.206.790.5840</span></div><div style="font-style:normal;font-variant:normal;font-stretch:normal;font-size:12px;line-height:20px;font-family:Arial,Helvetica,sans-serif;margin:0px"><font style="font-weight:bold" color="#bb1a1d">f</font><font color="#cf1d0c" style="font-weight:bold"> </font>+1.902.597.8447 <font style="font-size:12px;font-weight:bold" color="#bb1a1d">e</font><span style="font-size:12px">
</span><span style="font-size:12px"><a href="mailto:steve@surrette.com" style="color:rgb(64,64,64);text-decoration:none" target="_blank">steve@surrette.com</a></span></div>
<div style="padding-top:8px"><a href="http://www.facebook.com/RollsBattery" target="_blank"><img src="http://cdn3.iconfinder.com/data/icons/free-social-icons/67/facebook_square_gray-24.png" alt="" style="border:none"></a><a href="https://www.youtube.com/user/RollsBattery" target="_blank"></a><a href="https://www.youtube.com/RollsBatteryEngineering" target="_blank"></a><a href="https://www.youtube.com/RollsBatteryEngineering" target="_blank"></a><a href="https://www.youtube.com/RollsBatteryEngineering" target="_blank"><img src="http://cdn3.iconfinder.com/data/icons/free-social-icons/67/youtube_square_gray-24.png" alt="" style="border:none;margin-left:5px"></a><a href="https://www.linkedin.com/company/rolls-battery-engineering" target="_blank"></a><a href="https://www.linkedin.com/company/rolls-battery-engineering" target="_blank"></a><a href="https://www.linkedin.com/company/rolls-battery-engineering" target="_blank"><img src="http://cdn3.iconfinder.com/data/icons/free-social-icons/67/linkedin_square_gray-24.png" alt="" style="border:none;margin-left:5px"></a><a href="http://www.instagram.com/RollsBattery" target="_blank"></a><a href="http://www.instagram.com/RollsBattery" target="_blank"><img src="https://cdn3.iconfinder.com/data/icons/free-social-icons/67/instagram_square-24.png" style="margin-left:5px"></a></div><div style="padding-top:8px"><div style="padding-top:0px"><div style="padding-top:0px;max-width:450px"><span style="color:rgb(153,153,153);font-family:Arial,Helvetica,sans-serif;font-size:10px;line-height:10px"><div style="font-size:10px;color:rgb(153,153,153);padding-top:0px"><span style="font-family:Arial,Helvetica,sans-serif;line-height:10px"><span style="font-family:Arial,Helvetica,sans-serif;line-height:10px"><hr style="font-size:10px;color:rgb(153,153,153)"><div style="font-size:10px;color:rgb(153,153,153);padding-top:0px"><span style="font-family:Arial,Helvetica,sans-serif;line-height:10px">CONFIDENTIALITY: </span><span style="color:rgb(153,153,153);font-family:Arial,Helvetica,sans-serif;font-size:10px;line-height:14px">The information transmitted herein is intended only for the addressee and may contain confidential, proprietary and/or privileged material. Any unauthorized review, distribution or other use of or the taking of any action in reliance upon this information is prohibited. If you receive this email in error, please contact the sender and delete or destroy this message and all copies.</span></div><hr></span></span></div><table></table></span></div></div></div></div></div></div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Apr 3, 2024 at 10:03 AM Nick A Lucchese via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="overflow-wrap: break-word;">Greetings Kirk,<div><br></div><div>It is my understanding that the “charged parms met” comes from the FNDC since that is the component measuring the current and going by those guidelines in the “Battery Setup” menu assigned to the FNDC port. This would seem like a reasonable test and could be done remotely through Opticsre without requiring a trip to the site as well. Perhaps Lones can comment on this strategy?</div><div><br></div><div>Sometimes the smallest insignificant details can trigger a client regardless of how well we did with the rest of the system. I feel for you!</div><div><br></div><div>Nick</div><div><br><div><br><br>
</div>
<div><br><blockquote type="cite"><div>On Apr 2, 2024, at 12:42 PM, Kirk Herander <<a href="mailto:kirkh@vermont.solar" target="_blank">kirkh@vermont.solar</a>> wrote:</div><br><div><div dir="ltr">Hi,<div>Are you saying that this "charged parms met" message is actually coming from the Flexnet? I do have a flexnet in this system. The event log states the originating port to be "M", as from the Mate3s itself.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 2, 2024 at 1:49 AM Nick A Lucchese via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div>Hello Kirk,<div><br></div><div>Does the client rely on the fully charged indicator anyway? Perhaps defeat some of the settings that will satisfy the targets of the Flexnet? Maybe set the “charged voltage” to something a few volts higher than your absorption set point and/or take the timer all the way up to 240 minutes? It’s definitely frustrating that some clients are scared to press any buttons on the Mate, even that Events button can intimidate apparently!</div><div><br></div><div>Nick</div><div> <div><br></div><div><blockquote type="cite"><div>On Apr 1, 2024, at 12:08 PM, Kirk Herander via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:</div><br><div><div dir="ltr">Hello All,<div><br></div><div>I have a customer with a OB Radian GS8048A, grid tied, which logs a "charged parms met" message regularly. When it does, the event log LED on the 3s starts blinking. My customer thinks it's an error, and calls me. I Wish I could somehow defeat this event, and any non-error, from blinking the event LED for everyone's sanity.</div><div><br></div><div>Charged parms met is not an error, but it's crying fire in a theater to have this annoyance occurring. It happens several times a week. Is there any way to keep non-errors from flashing the LED?</div><div><br></div><div>OB tech support is starting to have long lead times, so I am asking here first. Thanks.<br clear="all"><div><br></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div style="font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><a name="m_3199412432871894642_m_-4329068769648361920_SignatureSanitizer__MailAutoSig"><b>Kirk Herander / </b></a><b><a href="mailto:kirkh@vermont.solar" title="Send an email to kirkh@vermont.solar; Send an email to kirkh@vermont.solar" style="color:blue" target="_blank">kirkh@vermont.solar</a></b></span></div><div style="font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><b>Owner|Principal, VT Solar, LLC</b></span></div><div style="font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt"><b><i>Celebrating our 33<sup>st</sup> Anniversary 1991-2024!!</i></b></span></div><div style="font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt">dba Vermont Solar Engineering</span><br></div><div style="font-family:Arial;font-size:16px;margin:0in 0in 0.0001pt"><span style="font-size:10pt">802.559.1225</span></div></div></div></div></div><br></div></blockquote></div><br></div></div></blockquote></div></div></blockquote></div><br></div></div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>