<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /></head><body style='font-size: 12pt; font-family: Verdana,Geneva,sans-serif'>
<div id="signature">Mine work fine closed loop with Discover AES only. I doubt there is much support on other batteries as they all use XW pro which uses the RS 485 protocol to close the loop with different battery brands.</div>
<div> </div>
<div>To get it going open loop you would use a custom battery menu and probably need an external battery mon and shunt.</div>
<div> </div>
<div>Ouch ! Sorry about that. Going to be a project!</div>
<div> </div>
<div>With an AES : 42-48-3000, 42-48-6650 it is just plugging in xanbus and you are done.</div>
<div><br />
<pre> </pre>
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" rel="noopener"> </a><a style="color: blue; font-size: 11px; font-family: 'Lucida Grande', Verdana, Arial, Helvetica, sans-serif; font-weight: 400; background-color: #ffffff;" href="https://offgridsolar1.com/" rel="noopener noreferrer"><span style="font-size: 12pt;">https://offgridsolar1.com/</span></a><a href="http://members.sti.net/offgridsolar/" rel="noopener"> </a>
e-mail <a href="mailto:offgridsolar@sti.net">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p><br /></p>
<p id="reply-intro">On 2024-03-06 11:35 am, Kevin Pegg via RE-wrenches wrote:</p>
<blockquote type="cite" style="padding: 0 0.4em; border-left: #1010ff 2px solid; margin: 0">
<div id="replybody1">
<style type="text/css">#replybody1 .v1EmailQuote { margin-left: 1pt; padding-left: 4pt; border-left: #800000 2px solid; }</style>
<div>
<div>Hello Wrenches,</div>
<div> </div>
<div>Has anyone been able to get a CSW4048 inverter to work with battery type set to Lithium? When I try that it gives a F89 battery discharge over-current error within a few seconds. The battery is at 100% SoC and there was only the inverter idle loads present.</div>
<div> </div>
<div>The CSW manual refers to document 976-0319-01-01 for specifics on Lithium. I have not been able to locate that document. Schneider tech support suggests try using custom battery setting, but it won’t go lower than 56V when the battery specs request 55V max.</div>
<div> </div>
<div>I specified the CSW4048 inverter for a Lithium installation not realizing until too late that the CSW doesn’t actually offer closed-loop BMS integration. Using the Insight device it does interface to the BMS and allows the MPPT controllers to integrate for BMS derived SoC based charge control. Unclear if the BatLev gauge on the SCP will accurately display SoC values from the BMS.</div>
<div> </div>
<div>Kevin</div>
<div> </div>
</div>
</div>
<br />
<div class="pre" style="margin: 0; padding: 0; font-family: monospace">_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank" rel="noopener noreferrer">http://re-wrenches.org</a><br /><br />List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank" rel="noopener noreferrer">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">http://www.members.re-wrenches.org</a><br /><br /></div>
</blockquote>
</body></html>