<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div dir="ltr"></div><div dir="ltr">Hi william</div><div dir="ltr"><br></div><div dir="ltr">For checking level the best trick I’ve ever seen is a solid glass rod. </div><div dir="ltr">I can’t remember if you have to grind one end flat or not. </div><div dir="ltr"><br></div><div dir="ltr">When you put the end into the water the top end your looking at changes color. The side you look at would be the one you grind. </div><div dir="ltr"><br></div><div dir="ltr">Mark the rod with tape or use an adjustable stop and you can fill or check the water exactly to the level you want. Easily adjustable to different batteries. </div><div dir="ltr"><br></div><div dir="ltr">For filling. The one steve recommended is classic. </div><div dir="ltr">The other technique is to use surgical tubing inserted into the end of a 2.5 gallon jug or drill a hole in the top of a 1 gallon. The correct size tubing won’t leak. And your fingers can start/stop the flow. </div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br><blockquote type="cite">On Feb 28, 2024, at 12:59 PM, William Miller via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><meta http-equiv="Content-Type" content="text/html; charset=us-ascii"><meta name="Generator" content="Microsoft Word 14 (filtered medium)"><style>@font-face { font-family: Calibri; }
@font-face { font-family: Verdana; }
p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif; }
a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }
a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }
span.EmailStyle17 { font-family: Verdana, sans-serif; color: windowtext; }
.MsoChpDefault { font-family: Calibri, sans-serif; }
@page WordSection1 { size: 8.5in 11in; margin: 1in; }
div.WordSection1 { page: WordSection1; }</style><div class="WordSection1"><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif"">Friends:</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif""> </span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif"">In spite of all of this talk about Li batteries, I still maintain a whole lot of flooded cells. I have always struggled with getting accurate measurements of the electrolyte level. Staring past a flashlight down into a cell looking with one eye through scratched safety glasses, it is hard to see just how high (or low) the level is. I am cogitating on a few ideas to make this easier and more accurate, but in the meantime, what are your favorite tricks for this?</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif""> </span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif"">TIA</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif""> </span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif"">William</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Verdana","sans-serif""> </span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Arial","sans-serif"">Miller Solar</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Arial","sans-serif"">17395 Oak Road, Atascadero, CA 93422</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Arial","sans-serif"">805-438-5600</span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Arial","sans-serif""><a href="http://www.millersolar.com/">www.millersolar.com</a></span></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Arial","sans-serif"">CA Lic. 773985</span></p><p class="MsoNormal"> </p><p class="MsoNormal"> </p></div>
<span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: http://re-wrenches.org</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</span><br><span>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>http://www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>http://www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></body></html>