<div dir="ltr"><div dir="ltr">I have no experience with the Hawaii connection, but another choice for a tap connector is the Ilso GTA type with cover. You don't have to cut the tapped line and don't rely on piercing it. <div><br></div><div>Brad Bassett</div><div><p class="MsoNormal" style="margin:0in 0in 8pt;line-height:107%;font-size:12pt;font-family:"Calibri Light",sans-serif">Application Engineer (ret.) 1985 Solar Eng Svcs ->
Applied Power -> Applied Power (Idaho Power)(incl: SES, AscensionTech, Alt
Energy Eng)-> Schott Applied Power-> 2003 AEE Solar-> AEE Solar
(Mainstream Energy)-> AEE Solar (Sunrun) 2023</p></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Aug 8, 2023 at 8:11 AM Dana Orzel via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF">
<p><font size="5">Oh Wise folks!</font></p>
<p><font size="5">Attached is a wire schematic please review. &
feel free to possibly use for yourself in the future.<br>
</font></p>
<p><font size="5">I am in a bind with an interconnection where I
have an apartment 6 pack meter box with all 120-240v/100 amp
breakers & assumed 100 amp busbars. The apts. were a mid
1970's original build. There are 4 apartment with 1
circuit/meter each & 1 house circuit/ meter for owners
use.The breaker boxes are Sylvania (yuck). Originally I assumed
a larger busbar due to 6 - 100 amp breakers & this was not
the case. We all know about assuming...</font></p>
<p><font size="5">I consulted with W-2 who had assisted my lead
installer in in the past from UT. He sent the following &
though it makes sense to me, the utility is asking how I can
have a 225 amp panel behind a 100 amp breaker. My response was
that all we are doing is achieving a properly sized bus bar to
accommodate the back feed.</font></p>
<p><font size="5">My Utility Idaho Power requires interconnection
with a meter that has a load on it. Solar only meters are not
allowed. This is for the owners loads only & he has 1 meter
per apt complex at 100amps each.<br>
</font></p>
<p><font size="5">I am wondering if any of you have used this
connection adaption to achieve a larger array connection &
how it went?</font></p>
<div>-- <br>
Dana Orzel Great Solar Works, Inc. C - 208.721.7003
<a href="mailto:dana@solarwork.com" target="_blank">dana@solarwork.com</a> Idaho Contractor - # 028765 Idaho PV # 028374
"Responsible Technologies for Responsible People since 1988"</div>
</div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>