<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /></head><body style='font-size: 12pt; font-family: Verdana,Geneva,sans-serif'>
<p id="reply-intro"><span style="font-size: 12pt;">It is pretty well laid out on the website for 3 + years that you need to use Insight.</span></p>
<div id="replybody1">
<div style="font-size: 12pt; font-family: Verdana,Geneva,sans-serif;">
<div>You should also read the installer info.</div>
<div> </div>
<div><a href="https://solar.se.com/us/en/2021/06/29/essential-advanced-resources-for-installers/" target="_blank" rel="noopener noreferrer">https://solar.se.com/us/en/2021/06/29/essential-advanced-resources-for-installers/</a></div>
<div> </div>
<div>SCP will work for some basic functions but is out of memory for XWP. Use for indication only.</div>
<div> </div>
<div>I am guessing that you did not program XWP to set the IEE region code as above in the installers manual? This is probably causing some extra issues for you.</div>
<div> </div>
<div>You do need the password and I can send it if you do not have it?</div>
<div> </div>
<div>Good Luck.</div>
<div> </div>
<div><br />
<pre> </pre>
<pre><strong><span style="font-size: small;">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" target="_blank" rel="noopener noreferrer">http://members.sti.net/offgridsolar/</a>
e-mail <a href="mailto:offgridsolar@sti.net" rel="noreferrer">offgridsolar@sti.net</a>
text 209 813 0060</span></strong></pre>
</div>
<p><br /></p>
<p id="v1v1reply-intro">On 2023-06-11 10:37 am, greg egan via RE-wrenches wrote:</p>
<div id="v1v1replybody1">
<div>Friends, <br /><br />I'm currently onsite with a system. Just replaced 4 XW + 6848's with 4 XW Pros. Updated the Gateway to rev. 1.17 and the Pros to 2.04. Have some questions/observations so far.<br /><br />System: Off Grid with 4 XW Pros, 18 MPPT 80 600s, 2 SCPs, 1 Gateway, 1 Battery Monitor, 1 AGS. 3000 ahr of NiFe batteries. 36 kW Kubota Genset.<br /><br />I tried using the Inverter SCP to program settings on the new inverters and it took everything but when I checked on InsightLocal the settings had not changed. They were all still default so I had to go through it again one at a time through insightlocal. I'm guessing the SCP no longer works for programming with the Gateway? Can anyone confirm? Programming used to work through the SCP with the old XW+ inverters and firmware. <br /><br />Tried using the Solar SCP to change settings on the charge controls but had to use insight local to change each individually. Used to be able to use the "copy from" function which was a real time saver. Wondering if anyone else has run into the same problem, or if it works for them, what am I missing? Is there a cool way to change one setting with insightlocal and get it to change the other 17? <br /><br />Observations:<br />- looking at the CC's via insightlocal,<br /> under configuration -> advanced ->controls - I set all chargers "enabled" but the next day or so they all go to "disabled". They all still work though. Doesn't seem to affect operations. <br /><br /> under configuration -> advanced ->charger settings - I have the first CC set to "primary" and the rest to secondary. No idea if that's right or not. seems to work. Options are "stand-alone, primary, secondary and echo". I could not find definitions in the manual on them. <br /><br />- looking at the XW Pros via insight local,<br /> under configuration -> advanced ->controls -> Backup Mode - I disabled BAckup mode since I'm not backing up the grid. <u>System shut down immediately.</u> Backup mode must be enabled when you're off grid. <br /><br />Thanks in advance : )<br /><br />Greg Egan<br />Remote Power Inc<br />Fairbanks, AK<br /><br /><br /> <br /><br /><br /><br /><br /><br /><br /><br /><br /></div>
</div>
<br />
<div class="v1v1pre">_______________________________________________<br />List sponsored by Redwood Alliance<br /><br />Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank" rel="noopener noreferrer">http://re-wrenches.org</a><br /><br />List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br /><br />Change listserver email address & settings:<br /><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br /><br />There are two list archives for searching. When one doesn't work, try the other:<br /><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank" rel="noopener noreferrer">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br /><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank" rel="noopener noreferrer">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br /><br />List rules & etiquette:<br /><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noopener noreferrer">http://www.re-wrenches.org/etiquette.htm</a><br /><br />Check out or update participant bios:<br /><a href="http://www.members.re-wrenches.org" target="_blank" rel="noopener noreferrer">http://www.members.re-wrenches.org</a><br /><br /></div>
</div>
</div>
</body></html>