<div dir="ltr"><div class="gmail_default" style="font-family:times new roman,serif;font-size:large">Was the inverter connected at the time of testing?  If so I suspect the inverter is loading the solar array below Vmp</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, May 17, 2023 at 11:23 PM frenergy via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Wrenches,<br>
<br>
             I've got a call from a customer that said their (my <br>
install) 17 year old GT system went dead. Basic stats: 23, Mitsubishi <br>
PVMF120EC3, label says V mpp= 17.6V and Voc = 22 V; top-of-pole; SMA <br>
SB3800U. Its one string of 23 PVs.  Full sun, 75 degrees ambient during <br>
testing. When I checked DC voltage at the inverter landings I got ~23-29 <br>
volts (fluctuating) same at the input side of the DC switch.  These <br>
panels have the old gasketted 4-screw covered J-boxes and screw <br>
terminals inside, I removed the covers from three panels and got 9.5 <br>
volts at the each of the panels' screw terminals,  all the wiring <br>
outside the boxes checks out.<br>
<br>
             The system had been functioning normally 3 weeks prior. I <br>
could check voltage at more panels I guess.  Ideas?<br>
<br>
Bill<br>
<br>
Feather River Solar Electric<br>
Bill Battagin, Owner<br>
4291 Nelson St.(shipping)<br>
5575 Genesee Rd. (USPS, UPS)<br>
Taylorsville, CA 95983<br>
530.284.1925 Office/ 530.258.1641 Cell<br>
CA Lic 874049<br>
Solar powered since 1982<br>
<br>
<br>
-- <br>
This email has been checked for viruses by Avast antivirus software.<br>
<a href="http://www.avast.com" rel="noreferrer" target="_blank">www.avast.com</a><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>