<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>If the temperature is right, my IR camera can see the rafters.
Best to check early on a cold morning with the heat on in the
building. Otherwise I'm of the William "Hammer" system
persuasion. Never found anything better.<br>
</p>
<div class="moz-cite-prefix">On 4/17/2023 1:31 PM, Garrison via
RE-wrenches wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAFFQ0oX14U3mkFA_FoJwc1zM0eDQVubvwiuOL4KAnurCddRshQ@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">Hi Kris,
<div><br>
</div>
<div>I started using the Bosch D-tect 150 a few years ago after
a friend who had success with it recommended it. Works great
on most roofs. It needs a smooth surface to roll on so I use
a piece of Soladeck box. Older roofs with ply over roof
boards don't scan very well so I sometimes go back to the
mallet method. </div>
<div><br>
</div>
<div>I also highly recommend the Chip Tool! Every installer
should have one. It's best use in my opinion is for
installing fall protection. I don't recommend it be used with
a "micro flashing" though, as the pilot hole next to the
rafter may only be barely covered by the "flashing".</div>
<div><br>
</div>
<div>Best,</div>
<div><br>
</div>
<div>
<div>Garrison Riegel</div>
<div><span
style="font-family:arial,sans-serif;font-size:x-small">Licensed
Electrician</span></div>
<div><span
style="font-family:arial,sans-serif;font-size:x-small">NABCEP
Certified PV Installation Professional™</span><br>
</div>
<div><br>
</div>
<div>(c) 773-515-5168 (e) <a
href="mailto:garrison@celestarsolar.com" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">garrison@celestarsolar.com</a> </div>
<div><img
src="https://ci3.googleusercontent.com/mail-sig/AIorK4xLdatxoLiSbEj27l4VL5roNynjq_vUURUZiAmFxjBZOdwvaTKoQw5MEYcT8FbXz61EfbX16MQ"
moz-do-not-send="true" width="200" height="49"></div>
</div>
<div><br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Sun, Apr 16, 2023 at
10:13 AM Kristopher Schmid via RE-wrenches <<a
href="mailto:re-wrenches@lists.re-wrenches.org"
moz-do-not-send="true" class="moz-txt-link-freetext">re-wrenches@lists.re-wrenches.org</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="auto">I am considering buying a deep scanner for
locating trusses. Any recommendations or testimonials?<br>
<br>
<div>Shine On!<br>
<br>
Kris Schmid<br>
Legacy Solar, LLC<br>
137 West 1st Avenue<br>
Luck, WI 54853<br>
<a href="http://www.legacysolar.com" target="_blank"
moz-do-not-send="true">www.legacysolar.com</a><br>
715-653-4295<br>
NABCEP Certified PV Installation Professional<br>
Licensed Wisconsin Master Electrician<br>
BSEE</div>
</div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a
href="http://re-wrenches.org" rel="noreferrer"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://re-wrenches.org</a><br>
<br>
List Address: <a
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't
work, try the other:<br>
<a
href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote>
</div>
<br>
<fieldset class="moz-mime-attachment-header"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a>
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
There are two list archives for searching. When one doesn't work, try the other:
<a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a>
</pre>
</blockquote>
</body>
</html>