<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Here's a 100 amp version of the Reliance box. Cheap, lots of
room, easy to wire up, but NEMA 1.</p>
<p><a class="moz-txt-link-freetext" href="https://www.electricgeneratorsdirect.com/Reliance-Controls-TCA1006D/p1102.html">https://www.electricgeneratorsdirect.com/Reliance-Controls-TCA1006D/p1102.html</a><br>
</p>
<div class="moz-cite-prefix">On 3/2/2023 6:10 PM, Howie Michaelson
via RE-wrenches wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAHMeMs=+nXxsGh8mFNSJPDtc=utDLo5RFB9=AcQk32sn05QWRg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="auto">Does anyone know of any bypass switch/breaker
setup for anything greater than 60 amps for 2 poles, other than
large DPDT switches which get pricey and hard to source
especially for 200 amps?
<div dir="auto">Howie</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Thu, Mar 2, 2023, 6:23 PM
Ray Walters via RE-wrenches <<a
href="mailto:re-wrenches@lists.re-wrenches.org"
moz-do-not-send="true" class="moz-txt-link-freetext">re-wrenches@lists.re-wrenches.org</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<p>I probably still have one of the old QO boxes on the
shelf, but I never liked them. Single pole, very tight,
and you had to double lug or use a weird split bolt
arrangement with exposed copper out past the breaker.</p>
<p>I started using these 60A T switches from Northern: <br>
</p>
<p><a
href="https://www.northerntool.com/shop/tools/product_200653609_200653609"
target="_blank" rel="noreferrer" moz-do-not-send="true"
class="moz-txt-link-freetext">https://www.northerntool.com/shop/tools/product_200653609_200653609</a></p>
<p>Midnite makes small 30A and 60A T switches as well:</p>
<p><a
href="https://www.midnitesolar.com/productPhoto.php?product_ID=416&productCat_ID=29&sortOrder=3&act=p"
target="_blank" rel="noreferrer" moz-do-not-send="true">https://www.midnitesolar.com/productPhoto.php?product_ID=416&productCat_ID=29&sortOrder=3&act=p</a></p>
<p>Ray Walters<br>
</p>
<div>On 3/2/2023 11:57 AM, Sindelar Solar via RE-wrenches
wrote:<br>
</div>
<blockquote type="cite"> Kris, It was SqD QO403, and it was
a 3-pole load center/disconnect, not 4-pole. You may
recall that the dual-inverter Trace Power Panels of long
ago used two of these, each one serving as an inverter
bypass switch to one 120V AC leg.<br>
<br>
<div>On 3/2/2023 11:46 AM, Kristopher Schmid via
RE-wrenches wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>Hi All,</div>
<div><br>
</div>
<div>I have a stand alone system that was upgraded
from an FX inverter to a Radian WITHOUT the
companion load center. I would like to add an
inverter bypass circuit to operate the house on
generator power. There used to be a 4 slot breaker
panel (SqD?) with the rocker switch preventing both
breakers from being in the on position
simultaneously. I have not been able to find it on
the interweb. Anyone know of something out there
that would meet my needs?</div>
<div><br>
</div>
<div>Kris<br>
</div>
<div>
<div dir="ltr" data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Shine On!<br>
<br>
Kris Schmid<br>
Legacy Solar, LLC<br>
137 West 1st Avenue<br>
Luck, WI 54853<br>
<a
href="http://www.legacysolar.com"
target="_blank"
rel="noreferrer"
moz-do-not-send="true">www.legacysolar.com</a><br>
715-653-4295<br>
NABCEP Certified PV
Installation Professional<br>
Licensed Wisconsin Master
Electrician<br>
BSEE</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<br>
</blockquote>
<br>
<div>-- <br>
<div>
<p class="MsoNormal" style="line-height:normal"><b><span>Allan
Sindelar</span></b><span><br>
</span><a href="mailto:allan@sindelarsolar.com"
target="_blank" rel="noreferrer"
moz-do-not-send="true"><span>allan@sindelarsolar.com</span></a><span><br>
</span></p>
<span> </span><span>(No longer) NABCEP Certified PV
Installation Professional</span><br>
<span> (Still) New Mexico EE98J Journeyman Electrician</span><br>
<span> </span><span><span> (Retired) </span>Founder,
<span>Positive Energy, Inc<span>.</span></span></span><br>
<span>(Retired) Founder, Sindelar Solar <br>
<b>505 780-2738 cell</b></span><span></span><br>
<p class="MsoNormal"> </p>
</div>
</div>
<br>
<fieldset></fieldset>
<pre>_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">http://re-wrenches.org</a>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
There are two list archives for searching. When one doesn't work, try the other:
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">http://www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" target="_blank" rel="noreferrer" moz-do-not-send="true" class="moz-txt-link-freetext">http://www.members.re-wrenches.org</a>
</pre>
</blockquote>
</div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a
href="http://re-wrenches.org" rel="noreferrer noreferrer"
target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://re-wrenches.org</a><br>
<br>
List Address: <a
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank" rel="noreferrer" moz-do-not-send="true"
class="moz-txt-link-freetext">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't
work, try the other:<br>
<a
href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/"
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm"
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer
noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote>
</div>
<br>
<fieldset class="moz-mime-attachment-header"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: <a class="moz-txt-link-freetext" href="http://re-wrenches.org">http://re-wrenches.org</a>
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
There are two list archives for searching. When one doesn't work, try the other:
<a class="moz-txt-link-freetext" href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a class="moz-txt-link-freetext" href="http://www.re-wrenches.org/etiquette.htm">http://www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a class="moz-txt-link-freetext" href="http://www.members.re-wrenches.org">http://www.members.re-wrenches.org</a>
</pre>
</blockquote>
</body>
</html>