<div dir="auto">I have a client with a large woodworking shop…cabinet table saw, large 20” 240V bench planer, chop saws, compressors and a vacuum system. A single Sol Ark 15K takes care of these loads flawlessly. It seems that that inductive load snag with the smaller models has been resolved with the 15K. </div><div dir="auto"><br></div><div dir="auto">Best,</div><div dir="auto"><br></div><div dir="auto">Chris </div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Jan 13, 2023 at 7:34 PM Glenn Burt via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;padding-left:1ex;border-left-color:rgb(204,204,204)">
<div>
<div style="font-size:10pt"><div dir="auto">According to a seminar I just attended, the new Midnite Solar Rosie will...</div><div dir="auto"><br></div><div><div dir="auto">-Glenn</div><div dir="auto">Sent from my 'smart'phone, so please excuse typos and spelling errors.</div></div></div></div><div><div style="font-size:10pt"><div id="m_-8053682154785391027LGEmailHeader" dir="auto"><div dir="auto"><br></div><div dir="auto">------ Original message------</div><div dir="auto"><b>From: </b>Dave Angelini Offgrid Solar via RE-wrenches<u></u><u></u></div><div dir="auto"><b>Date: </b>Fri, Jan 13, 2023 3:55 PM</div><div dir="auto"><b>To: </b>RE-wrenches;</div><div dir="auto"><b>Cc: </b>Dave Angelini Offgrid Solar;</div><div dir="auto"><b>Subject:</b>Re: [RE-wrenches] Low Frequency transformer off-grid inverter options</div><div dir="auto"><br></div></div><div dir="auto">
<div id="m_-8053682154785391027signature">There is not anything I know of that will out surge XW pro 6948. A great monitoring platform and much better support/installer training in the last 18 months. Perfect for a shop with unknown peak surges.<br>
<pre style="font-family:monospace"> </pre>
<pre style="font-family:monospace"><strong style="font-family:monospace"><span style="font-size:small;font-family:monospace">Dave Angelini Offgrid Solar
"we go where powerlines don't"
<a href="http://members.sti.net/offgridsolar/" rel="noopener" target="_blank" style="font-family:monospace">http://members.sti.net/offgridsolar/</a>
e-mail <a href="mailto:offgridsolar@sti.net" target="_blank" style="font-family:monospace">offgridsolar@sti.net</a>
text <a href="tel:209%20813%200060" target="_blank" style="font-family:monospace">209 813 0060</a></span></strong></pre>
</div>
<p><br></p>
<p id="m_-8053682154785391027reply-intro">On <a href="tel:2023-01-13%2011" target="_blank">2023-01-13 11</a>:57 am, Jay via RE-wrenches wrote:</p>
<blockquote type="cite" style="padding:0px 0.4em;border-left-width:2px;border-left-style:solid;margin:0px;border-left-color:rgb(16,16,255)">
<div id="m_-8053682154785391027replybody1">
<div dir="auto">
<div dir="ltr"> </div>
<div dir="ltr">Hi Mac</div>
<div dir="ltr"> </div>
<div dir="ltr">The radian is low voltage
transformer</div>
<div dir="ltr">Based. Has hella surge capacity </div>
<div dir="ltr"> </div>
<div dir="ltr">I would consider what web based monitoring system he wants and go with that platform. </div>
<div dir="ltr"> </div>
<div dir="ltr">Regardless of system I'd install soft start/vfd on the larger units. Just easier on everything.</div>
<div dir="ltr"> </div>
<div dir="ltr">The solark 12 doesn't seem to be good for larger loads and doesn't do out of balance well, and limited to 6kw per phase. The new 15 might be better, not sure. Numerous YouTube videos showing side by side vs XW and radian. Both run stuff over their rating which the SolA won't run even though its under its rating. </div>
<div dir="ltr"> </div>
<div dir="ltr">Good luck</div>
<div dir="ltr"> </div>
<div dir="ltr">Jay</div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"><br>
<blockquote type="cite" style="padding:0px 0.4em;border-left-width:2px;border-left-style:solid;margin:0px;border-left-color:rgb(16,16,255)">On Jan 13, 2023, at 11:34 AM, Mac Lewis via RE-wrenches <a href="mailto:%3Cre-wrenches@lists.re-wrenches.org" target="_blank"><u></u>> wrote:<u></u></a><br><br></blockquote>
</div>
<blockquote type="cite" style="padding:0px 0.4em;border-left-width:2px;border-left-style:solid;margin:0px;border-left-color:rgb(16,16,255)">
<div dir="ltr">
<div dir="ltr">Hello Wrenches,
<div> </div>
<div>I have a new client that has ran a pretty decent wood shop for about 10 years on a Magnum 4448. He's got some large loads, planers, saws, compressors vacuums etc. They are really nice, heavy duty pieces of equipment. Amazingly, the Magnum has been able to start these loads for the most part for 10 years, but he has reported that it has gotten worse lately (could be a load issue), brown outs, dimming
etc</div>
<div> </div>
<div>He wants to upgrade the system, get remote monitoring etc. I tried a test with a Sol-Ark 12, and it won't start these large motor loads. I was a little surprised by that but I know they aren't as good as the low freq transformer based inverters at these surges.</div>
<div> </div>
<div>I confirmed that its not just an overload from imbalance because the 240V loads will also overload it. I got an inrush measurement of 48.5A Ac @240 (but it didn't start the load before Sol-Ark would shut off) </div>
<div> </div>
<div>What are my options?</div>
<div>Schneider XW Pro 6848</div>
<div>Outback Radian 8048 (Is this a low freq device?)</div>
<div>Sunny Islands are beasts but weird to work with and not user friendly</div>
<div> </div>
<div>Any others I should consider? He does have some significant 120 only loads so I don't think the Outback vfxr are a good choice.</div>
<div> </div>
<div>Is it as
simple as saying if the Magnum can start this load, the Radian should?</div>
<div> </div>
<div>I appreciate your input!</div>
<div> </div>
<div>--<br>
<div dir="ltr">Mac Lewis<br><br>
<p align="left"><span style="font-family:Verdana,Arial,Helvetica,sans-serif;color:rgb(0,0,0)"><span style="font-size:small;font-family:Verdana,Arial,Helvetica,sans-serif"><span style="font-family:arial;font-weight:normal;color:rgb(48,90,120)"><span style="font-family:"times new roman",serif">"Yo solo sé que no sé nada." </span><span style="font-weight:bold;font-family:arial;color:rgb(104,104,104)"><span style="font-family:"times new roman",serif">-Sócrates</span></span></span></span></span></p>
</div>
</div>
</div>
<span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: <a href="http://re-wrenches.org" target="_blank">http://re-wrenches.org</a></span><br><span></span><br><span>List Address:<a href="mailto:%0D+RE-wrenches@lists.re-wrenches.org" target="_blank"> RE-wrenches@lists.re-wrenches.org</a></span><br><span></span><br><span>Change listserver email address & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https<a href="mailto:://www.mail-archive.com/re-wrenches@lists.re-wrenches.org" target="_blank">://www.mail-archive.com/re-wrenches@lists.re-wrenches.org</a>/</span><br><span><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br><span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">http://www.re-wrenches.org/etiquette.htm</a></span><br><span></span><br><span>Check out or update participant
bios:</span><br><span><a href="http://www.members.re-wrenches.org" target="_blank">http://www.members.re-wrenches.org</a></span><br><span></span></div>
</blockquote>
</div>
</div>
<br>
<div style="margin:0px;padding:0px;font-family:monospace">_______________________________________________<br>List sponsored by Redwood Alliance<br><br>Pay optional member dues here: <a href="http://re-wrenches.org" rel="noopener noreferrer" target="_blank" style="font-family:monospace">http://re-wrenches.org</a><br><br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" style="font-family:monospace">RE-wrenches@lists.re-wrenches.org</a><br><br>Change listserver email address & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noopener noreferrer" target="_blank" style="font-family:monospace">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>There are two list archives for searching. When one doesn't work, try the other:<br><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noopener noreferrer" target="_blank" style="font-family:monospace">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noopener noreferrer" target="_blank" style="font-family:monospace">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm" rel="noopener noreferrer" target="_blank" style="font-family:monospace">http://www.re-wrenches.org/etiquette.htm</a><br><br>Check out or update participant bios:<br><a href="http://www.members.re-wrenches.org" rel="noopener noreferrer" target="_blank" style="font-family:monospace">http://www.members.re-wrenches.org</a><br><br></div>
</blockquote>
</div></div>
</div>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div>Chris Sparadeo</div><div><br></div><div><br></div><div>C_802-369-4458</div><div>H_802-728-3059</div><div></div></div></div></div></div></div>