<div dir="auto"><div>Jeremy,</div><div dir="auto"><br></div><div dir="auto">My vendor sent me the attached tech note. I tried the long range Vonets device on a recent project with two inverters. They were easy to set up with a laptop. And install is easy, since it is meant to get power from the USB port in the inverter.</div><div dir="auto"><br></div><div dir="auto">The initial install went well. Then the system was shut off for a few days until we got inspected and PTO. When it was turned back on, they no longer worked. One would just not even turn on anymore. The issue was the USB port in the inverter. If I swapped the Vonets devices the issue stayed with the inverter, and they both powered on just fine in the other inverter. I called tech support and the tech I talked to said you are not supposed to use the USB port to power anything and was not even aware of this tech note. So I avoided the issue by wiring the two inverters together. But Then the other device was being very flaky. I had previously installed a wireless access point on the outside of the house, so the WiFi signal was good, but maybe not so great behind the array and inside the inverter. </div><div dir="auto"><br></div><div dir="auto">I then finally installed a box with an outlet and one of these:</div><div dir="auto"><a href="https://www.amazon.com/Dual-Band-WiFi-Range-Extender/dp/B08DHCC8BN/">https://www.amazon.com/Dual-Band-WiFi-Range-Extender/dp/B08DHCC8BN/</a></div><div dir="auto">This is meant to be a range extender, but it also has a lan port. I ran a cable to both inverters and comms have been great since.</div><div dir="auto"><br></div><div dir="auto">I'd be curious to know if anyone else has had luck with the Vonets devices being powered off USB? I may try again on an upcoming project where the wifi will be coming from the back of the array rather than the front.</div><div dir="auto"><br></div><div dir="auto">Cheers,</div><div dir="auto">Dave<br><br><div class="gmail_quote" dir="auto"><div dir="ltr" class="gmail_attr">On Tue, Nov 1, 2022, 6:42 PM William Miller via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">Jeremy:</div><div dir="auto"><br></div><div dir="auto">If the device you want to connect to does not have Wifi capability then you don’t need an extender, you need a station device. The unit will receive via wifi and convert to a wired Ethernet cable. </div><div dir="auto"><br></div><div dir="auto">I recommend the Ubiquiti nano-stations. <div><a href="https://store.ui.com/collections/operator-airmax-devices/products/2-4-ghz-loco" target="_blank" rel="noreferrer">https://store.ui.com/collections/operator-airmax-devices/products/2-4-ghz-loco</a></div><div dir="auto"><br></div><div dir="auto">You have to know a bit about wifi networking to set one up. There are tutorials out there to coach you. Contact me off-line if you want more information on setting one up. </div><div dir="auto"><br></div><div dir="auto">William</div><div dir="auto"><br></div></div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Nov 1, 2022 at 3:25 PM Jeremy Rodriguez via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;padding-left:1ex;border-left-color:rgb(204,204,204)">Can anyone recommend the best Wi-Fi repeater to use with the new Sunny boys’ that do not have Wi-Fi capability? <br>
Mr. Mahon?<br>
<br>
<br>
Jeremy Rodriguez <br>
Solar Installation / Design<br>
All Solar, Inc.<br>
1453 M St. <br>
Penrose Colorado 81240<br>
<br>
Sent by Jeremy's iPhone. Sorry for typos and shorthand. <br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>-- <br><div dir="ltr" data-smartmail="gmail_signature"><br>William Miller<br>Miller Solar.com<br>895-438-5600<br><a href="http://www.millersolar.com" target="_blank" rel="noreferrer">www.millersolar.com</a><br></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="noreferrer">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div></div>